swaits
6937ad47ba
The full 1.0 client surface, matching the protocol v2 wire definitions from donglora-protocol 1.0.0.
* Public API is now async. The blocking Client<T: Transport> is replaced by Dongle (from donglora_client::connect / connect_with / ConnectOptions).
* src/client.rs and src/codec.rs are removed in favor of src/dongle.rs (high-level surface), src/session.rs (per-client tag/slot state), src/retry.rs (RetryPolicy + tx_with_retry), src/errors.rs (thiserror-based ClientError / ClientResult). src/protocol.rs is replaced by direct donglora-protocol imports.
* Transport is now tokio-serial for USB and tokio::net::{UnixStream, TcpStream} for mux, replacing the blocking serial + shim model.
* Dongle::tx_with_retry(data, &RetryPolicy) implements PROTOCOL.md §6.10 randomized backoff for CHANNEL_BUSY / EBUSY, returning a TxOutcome with per-attempt trace.
* Background keepalive task pings every 500 ms on host idle, tracking the 1 s inactivity timeout from §3.4 with 2x margin. Disable via ConnectOptions::keepalive(false).
* Auto-recovery from ERR(ENOTCONFIGURED): the Dongle caches the last SET_CONFIG and silently re-applies on session drop, retrying once.
* Error taxonomy switches from anyhow to thiserror. Transport-level conditions (Timeout, TransportClosed, ReaderExited, BadFrame) are first-class.
* Examples rewritten for the async API: examples/ping.rs, examples/tx.rs, examples/rx.rs all target the MeshCore US preset (910.525 MHz / BW 62.5 / SF 7 / CR 4/5 / sync 0x1424 / 20 dBm). examples/common/mod.rs holds the shared helper.
* tests/vectors.rs gains protocol-level roundtrip coverage anchored to the published donglora-protocol 1.0.0 types.
31 lines
902 B
Rust
31 lines
902 B
Rust
//! Connect to a DongLoRa device, ping it, and print its info.
|
|
//!
|
|
//! Run with: `cargo run --example ping`
|
|
|
|
use donglora_client::connect;
|
|
|
|
#[tokio::main]
|
|
async fn main() -> anyhow::Result<()> {
|
|
tracing_subscriber_init();
|
|
|
|
let dongle = connect().await?;
|
|
println!("connected!");
|
|
|
|
dongle.ping().await?;
|
|
println!("ping ok");
|
|
|
|
let info = dongle.info();
|
|
println!("firmware: v{}.{}.{} ({:?})", info.fw_major, info.fw_minor, info.fw_patch, info.chip_id());
|
|
println!("TX power range: {} .. {} dBm", info.tx_power_min_dbm, info.tx_power_max_dbm);
|
|
println!("max OTA payload: {} bytes", info.max_payload_bytes);
|
|
|
|
dongle.close().await;
|
|
Ok(())
|
|
}
|
|
|
|
fn tracing_subscriber_init() {
|
|
// Best-effort subscriber; ignore errors if one is already set.
|
|
use tracing_subscriber::{EnvFilter, fmt};
|
|
let _ = fmt().with_env_filter(EnvFilter::from_default_env()).try_init();
|
|
}
|