feat: add Waveshare RP2040-LoRa board support

First RP2040 board and third MCU family (after ESP32-S3 and nRF52840).

Hardware: RP2040 + SX1262 radio, 850-930 MHz HF, PE4259 antenna switch,
LED on GPIO25, no OLED, USB-C via FPC ribbon cable to adapter board.

New files:
- src/hal/rp2040.rs: MCU primitives (SPI bus, USB driver, flash unique ID MAC)
- src/board/waveshare_rp2040_lora.rs: board implementation
- ld/rp2040-memory.x: linker memory layout

Also fixes cortex-m-rt/set-vtor (moved from global dep to per-board feature,
since Cortex-M0+ has no VTOR register) and makes build.rs memory.x selection
target-aware.

README.md

@@ -24,6 +24,7 @@ All commands are run from the `firmware/` directory.
 | Heltec V3 (UART) | `heltec_v3_uart` | ESP32-S3 | SX1262 | CP2102 bridge | xtensa-esp32s3-none-elf |
 | Heltec V4 | `heltec_v4` | ESP32-S3 | SX1262 | Native CDC-ACM | xtensa-esp32s3-none-elf |
 | RAK WisBlock 4631 | `rak_wisblock_4631` | nRF52840 | SX1262 | Native CDC-ACM | thumbv7em-none-eabihf |
+| Waveshare RP2040-LoRa | `waveshare_rp2040_lora` | RP2040 | SX1262 | Native CDC-ACM | thumbv6m-none-eabi |
 | Wio Tracker L1 | `wio_tracker_l1` | nRF52840 | SX1262 | Native CDC-ACM | thumbv7em-none-eabihf |
 
 ### Heltec V3 USB Note