build.rs resolves the linker layout in two steps: per-board override
`ld/{board}-memory.x` first, MCU-family default second. Lets a board
deviate from the family default without a per-board build matrix.
Adds `ld/wio_tracker_l1-memory.x` with `ORIGIN = 0x1000` (no-SD
layout). The Wio Tracker L1 ships from Seeed with s140 SoftDevice, but
our earlier `ORIGIN = 0x1000, LENGTH = 0xE9000` linker silently
overwrote it across many UF2 flashes; the bootloader now reports
`SoftDevice: not found`. Until s140 is restored via SWD, the WIO
needs the no-SD layout to match the bootloader's actual boot chain.
Delete the per-board file once SD is restored -- the build will then
fall back to the SD-aware `ld/nrf52840-memory.x` and the WIO matches
every other nRF52840 board.
First RP2040 board and third MCU family (after ESP32-S3 and nRF52840).
Hardware: RP2040 + SX1262 radio, 850-930 MHz HF, PE4259 antenna switch,
LED on GPIO25, no OLED, USB-C via FPC ribbon cable to adapter board.
New files:
- src/hal/rp2040.rs: MCU primitives (SPI bus, USB driver, flash unique ID MAC)
- src/board/waveshare_rp2040_lora.rs: board implementation
- ld/rp2040-memory.x: linker memory layout
Also fixes cortex-m-rt/set-vtor (moved from global dep to per-board feature,
since Cortex-M0+ has no VTOR register) and makes build.rs memory.x selection
target-aware.
swaits