Replaces the ad-hoc display loop with a declarative hsmc statechart
(Off/On.{Splash.{LearnMore,Info}, Dashboard.{Listening,Transmitting}})
and swaps the Radio→Display channel from a RadioStatus watch to a
typed RadioEvent queue. The radio task now emits discrete mode and
packet events instead of publishing full status snapshots; the
display consumes them through the statechart, which also handles the
5 s splash alternation and 1 s sparkline tick via `on(after …)` /
`on(every …)` transitions.
Also:
- Add hsmc dep and embassy/tokio feature shims (hsmc proc macro
evaluates `cfg(feature = "embassy")` in this crate).
- Fix USB disconnect path in `host/usb.rs` so the DTR branch always
runs on read error (was early-continuing, starving display/radio
reset).
Bump embassy-executor 0.9 -> 0.10 and embassy-rp 0.9 -> 0.10 from crates.io.
Patch esp-hal, esp-rtos, esp-backtrace, esp-println from esp-rs/esp-hal main
branch (esp-rtos 0.2.0 on crates.io pins embassy-executor ^0.9).
API migrations:
- embassy-executor: arch-cortex-m -> platform-cortex-m feature rename
- embassy-executor: SpawnToken now returned as Result from task functions
- esp-hal main: efuse::Efuse::mac_address() -> efuse::base_mac_address()
- esp-hal main: esp_rtos::start() now requires SoftwareInterrupt<0>
- embassy-rp 0.10: SPI constructor requires DMA interrupt bindings
Also fixes UART display stuck on splash (sent Reset instead of On at boot)
and switches just check to clippy -D warnings.
- heltec_v3 now uses USB OTG (requires hardware mod: solder R29/R3)
- heltec_v3_uart added as fallback for stock boards
- Removed every #[allow(dead_code)] — fixed root causes instead:
- Comm types (UsbParts/UartParts) moved to individual board files
- USB/UART init removed from hal (boards call esp-hal directly)
- SH1106 driver gated on boards that use it
- UART task sends DisplayCommand::Reset at startup (variant now used)
- ErrorCode::CrcError removed (SX1262 drops bad-CRC silently)
- check/clippy now use --release (no more Xtensa dev-mode warnings)
- Updated README with hardware mod docs and board table
- Flattened radio/ directory to radio.rs (was just one file)
- Flattened display/ to display.rs (combined task + rendering as inline module)
- Moved SH1106 display driver reference from display/ to driver/ (done in Phase 2)
- Suppressed dead_code warnings for conditional USB/UART types in hal
- All boards: zero warnings, zero cfg in application code
swaits