build.rs resolves the linker layout in two steps: per-board override
`ld/{board}-memory.x` first, MCU-family default second. Lets a board
deviate from the family default without a per-board build matrix.
Adds `ld/wio_tracker_l1-memory.x` with `ORIGIN = 0x1000` (no-SD
layout). The Wio Tracker L1 ships from Seeed with s140 SoftDevice, but
our earlier `ORIGIN = 0x1000, LENGTH = 0xE9000` linker silently
overwrote it across many UF2 flashes; the bootloader now reports
`SoftDevice: not found`. Until s140 is restored via SWD, the WIO
needs the no-SD layout to match the bootloader's actual boot chain.
Delete the per-board file once SD is restored -- the build will then
fall back to the SD-aware `ld/nrf52840-memory.x` and the WIO matches
every other nRF52840 board.
Migrate from hsmc 0.2 (local-patched) to hsmc 0.3.0 (crates.io, with
embassy + trace-defmt features). Restructure radio chart and bundle
several adjacent stability changes that need to land together for
soak runs.
Radio chart:
- Booting (default, no handlers) -> Operational (default Unconfigured;
super-state owning CmdPing/CmdGetInfo/Reset/WedgeDetected handlers
+ Recovering + CheckRecoveryBudget) -> Dead (terminal).
- Cold init's during is structurally un-cancellable.
- radio_task is a 30-line shim that panics if run() returns (chart is
non-terminating).
- Internal queue capacity bumped 8 -> 32 to cover action-emit bursts.
Host chart:
- Connected splits into WaitingForFirstFrame (default, no timer) +
Active (chart-owned 1s inactivity timer via on(after) + self-
transition on FrameReceived). Manual Timer::after + last_frame_at
removed.
Soak hardening:
- ld/nrf52840-memory.x: app start 0x1000 -> 0x26000 to leave the
factory s140 SoftDevice dormant in flash.
- hal/nrf52840.rs: dump POWER.RESETREAS on boot -- WARN on DOG/LOCKUP,
INFO on RESETPIN/SREQ/wake-from-OFF.
- host/usb.rs: read_packet errors discriminated -- Disabled is debug
(normal during USB enum), BufferOverflow stays warn.
- COBS encode warns now carry type/tag/payload-length for diagnosis.
- RADIO_THROTTLED static initializes to true (no proof of host drain
at boot).
- driver/sh1106.rs: init retries 3x with 100ms backoff (intermittent
first-write race on power-up).
- Cargo.toml: unexpected_cfgs allowlist for hsmc's journal/trace-*
features.
docs/semtech_lora_cad_lbt_guidebook.md: vendor the Semtech CAD/LBT
reference for offline lookup.
First RP2040 board and third MCU family (after ESP32-S3 and nRF52840).
Hardware: RP2040 + SX1262 radio, 850-930 MHz HF, PE4259 antenna switch,
LED on GPIO25, no OLED, USB-C via FPC ribbon cable to adapter board.
New files:
- src/hal/rp2040.rs: MCU primitives (SPI bus, USB driver, flash unique ID MAC)
- src/board/waveshare_rp2040_lora.rs: board implementation
- ld/rp2040-memory.x: linker memory layout
Also fixes cortex-m-rt/set-vtor (moved from global dep to per-board feature,
since Cortex-M0+ has no VTOR register) and makes build.rs memory.x selection
target-aware.
swaits