swaits
4cccb65124
The wire protocol is re-specified as DongLoRa Protocol v2 (see PROTOCOL.md). Every type_id, tag-correlation rule, and field layout is incompatible with 0.1.0. * Add PROTOCOL.md as the normative spec for the v2 wire format. * Replace framing.rs with a streaming FrameDecoder that emits (type_id, tag, payload) triples on each COBS-delimited, CRC-checked frame. * Split the single-file lib.rs into dedicated modules: frame, commands, events, errors, modulation, info, crc, chip_id. Re-exports preserve convenience imports at the crate root. * Replace RadioConfig / Bandwidth with a Modulation enum covering LoRa, FSK/GFSK, LR-FHSS, and FLRC, each with its own typed parameter struct. * Add TxFlags, RxOrigin, SetConfigResult, OkPayload to model v2 response shapes, and RadioChipId for GET_INFO. * Rewrite fuzz corpus: replace the 4 cobs_* / command_roundtrip targets with decoder_feed, frame_roundtrip, lora_config_roundtrip, and parse_device_message; drop parse_radio_config. * Expand proptest and mutation-killer coverage for the new wire shape. * Rewrite canonical-byte test vectors against the v2 spec.
10 lines
1018 B
Plaintext
10 lines
1018 B
Plaintext
# Seeds for failure cases proptest has generated in the past. It is
|
|
# automatically read and these particular cases re-run before any
|
|
# novel cases are generated.
|
|
#
|
|
# It is recommended to check this file in to source control so that
|
|
# everyone who runs the test benefits from these saved cases.
|
|
cc 64af53fe0215619bcede1dcaa56542db91b76a0e54503b6972ff4e3c6cd08e2f # shrinks to cfg = FskConfig { freq_hz: 0, bitrate_bps: 0, freq_dev_hz: 0, rx_bw: 0, preamble_len: 0, sync_word_len: 0, sync_word: [0, 0, 0, 0, 0, 0, 0, 1] }
|
|
cc a06f54304af03f33b704275b09b6ff07210078a04104dc2eac284b8d7cecbab9 # shrinks to m = FskGfsk(FskConfig { freq_hz: 0, bitrate_bps: 0, freq_dev_hz: 0, rx_bw: 0, preamble_len: 0, sync_word_len: 0, sync_word: [0, 0, 0, 0, 0, 0, 0, 1] }), tag = 1
|
|
cc bbb3809fa365465d27529942bd6d43b83af837bae0aa93b568818a65a3382bf1 # shrinks to cmd = SetConfig(FskGfsk(FskConfig { freq_hz: 0, bitrate_bps: 0, freq_dev_hz: 0, rx_bw: 0, preamble_len: 0, sync_word_len: 0, sync_word: [0, 0, 0, 0, 0, 0, 0, 1] })), tag = 1
|