Three changes, all from finally having working RAK4631 firmware and
noticing the homepage grid was hand-coded, stale, and disconnected from
the flasher.
1. RAK4631 display name. Silkscreen + RAK marketing call this module
'RAK4631'; 'WisBlock' is the ecosystem brand. The site was showing
'RAK WisBlock 4631', which matched neither the product name nor the
firmware commit message ('RAK4631 WisBlock bring-up'). It also
contradicted Uf2DownloadFlow.svelte, which already correctly told
users 'A USB drive named RAK4631 should appear'. Renamed to 'RAK4631
WisBlock' in boards.ts. Stable identifiers (board id, asset filename
pattern, driveName lookup) unchanged so v1.4.0 artifacts still
resolve.
2. Homepage grid is now data-driven from boards.ts. Previously a
hand-coded list that had silently drifted: missing the LilyGo T-Beam
classic, LilyGo T-Beam S3 Supreme, and the Heltec V3 UART variant.
Now maps over the same `boards` array the flasher uses, sorted
case-insensitively by display name. Adding a board in one place
updates both pages. `badgeText()` and `badgeColor()` lifted out of
BoardSelector.svelte into boards.ts so the label and accent color
have a single source of truth too.
3. Homepage cards are now links — clicking a card takes you to
/flash?board=<id> with that board pre-selected. Flasher.svelte reads
the param on mount and sets selectedBoard if the id resolves, so the
user lands on the version-picker step directly.
The flasher's BoardSelector keeps its richer UI (search filter,
MCU-family grouping) — only the simpler homepage grid was unified.
ESP32-S3 Meshtastic handset with SH1106 OLED. Flashes via the
CP2102 bridge, so this board is download-only like heltec_v3_uart —
Web Serial is unreliable through the bridge. The existing
`download-only` branch of EspFlashFlow surfaces the CP2102 warning
plus a .bin download and espflash CLI instructions, so no new
component code is needed.
ESP32-S3 grid in BoardSelector goes from sm:grid-cols-3 to
sm:grid-cols-2 lg:grid-cols-4 to accommodate the fourth ESP board.
Homepage Supported Boards grid drops from lg:grid-cols-5 to
lg:grid-cols-3 (3x2 layout) — six 200-px cards in one row was tight.
New RP2040 board family in board selector, homepage grid, and UF2
download flow (RPI-RP2 drive name, correct probe-rs chip).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
swaits
