feat: add display UI with splash screen, dashboard, and RSSI sparkline

Implement full SSD1306 OLED display support:
- Splash screen on boot (1.5s) with project name, version, board
- Dashboard showing radio state, config, counters, RSSI/SNR
- RSSI history sparkline (64-sample ring buffer, 2px-wide bars)
- DisplayOn/DisplayOff host commands routed via dedicated channel
- Pure render functions against generic DrawTarget (no hardware coupling)
- Display on/off control bypasses radio task entirely

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

vendor/embedded-hal-0.2.7/src/adc.rs

@@ -0,0 +1,98 @@
+//! Analog-digital conversion traits
+
+#[cfg(feature = "unproven")]
+use nb;
+
+/// A marker trait to identify MCU pins that can be used as inputs to an ADC channel.
+///
+/// This marker trait denotes an object, i.e. a GPIO pin, that is ready for use as an input to the
+/// ADC. As ADCs channels can be supplied by multiple pins, this trait defines the relationship
+/// between the physical interface and the ADC sampling buffer.
+///
+/// ```
+/// # use std::marker::PhantomData;
+/// # use embedded_hal::adc::Channel;
+///
+/// struct Adc1; // Example ADC with single bank of 8 channels
+/// struct Gpio1Pin1<MODE>(PhantomData<MODE>);
+/// struct Analog(()); // marker type to denote a pin in "analog" mode
+///
+/// // GPIO 1 pin 1 can supply an ADC channel when it is configured in Analog mode
+/// impl Channel<Adc1> for Gpio1Pin1<Analog> {
+///     type ID = u8; // ADC channels are identified numerically
+///
+///     fn channel() -> u8 { 7_u8 } // GPIO pin 1 is connected to ADC channel 7
+/// }
+///
+/// struct Adc2; // ADC with two banks of 16 channels
+/// struct Gpio2PinA<MODE>(PhantomData<MODE>);
+/// struct AltFun(()); // marker type to denote some alternate function mode for the pin
+///
+/// // GPIO 2 pin A can supply an ADC channel when it's configured in some alternate function mode
+/// impl Channel<Adc2> for Gpio2PinA<AltFun> {
+///     type ID = (u8, u8); // ADC channels are identified by bank number and channel number
+///
+///     fn channel() -> (u8, u8) { (0, 3) } // bank 0 channel 3
+/// }
+/// ```
+#[cfg(feature = "unproven")]
+pub trait Channel<ADC> {
+    /// Channel ID type
+    ///
+    /// A type used to identify this ADC channel. For example, if the ADC has eight channels, this
+    /// might be a `u8`. If the ADC has multiple banks of channels, it could be a tuple, like
+    /// `(u8: bank_id, u8: channel_id)`.
+    type ID;
+
+    /// Get the specific ID that identifies this channel, for example `0_u8` for the first ADC
+    /// channel, if Self::ID is u8.
+    fn channel() -> Self::ID;
+
+    // `channel` is a function due to [this reported
+    // issue](https://github.com/rust-lang/rust/issues/54973). Something about blanket impls
+    // combined with `type ID; const CHANNEL: Self::ID;` causes problems.
+    //const CHANNEL: Self::ID;
+}
+
+/// ADCs that sample on single channels per request, and do so at the time of the request.
+///
+/// This trait is the interface to an ADC that is configured to read a specific channel at the time
+/// of the request (in contrast to continuous asynchronous sampling).
+///
+/// ```
+/// use embedded_hal::adc::{Channel, OneShot};
+///
+/// struct MyAdc; // 10-bit ADC, with 5 channels
+/// # impl MyAdc {
+/// #     pub fn power_up(&mut self) {}
+/// #     pub fn power_down(&mut self) {}
+/// #     pub fn do_conversion(&mut self, chan: u8) -> u16 { 0xAA55_u16 }
+/// # }
+///
+/// impl<WORD, PIN> OneShot<MyAdc, WORD, PIN> for MyAdc
+/// where
+///    WORD: From<u16>,
+///    PIN: Channel<MyAdc, ID=u8>,
+/// {
+///    type Error = ();
+///
+///    fn read(&mut self, _pin: &mut PIN) -> nb::Result<WORD, Self::Error> {
+///        let chan = 1 << PIN::channel();
+///        self.power_up();
+///        let result = self.do_conversion(chan);
+///        self.power_down();
+///        Ok(result.into())
+///    }
+/// }
+/// ```
+#[cfg(feature = "unproven")]
+pub trait OneShot<ADC, Word, Pin: Channel<ADC>> {
+    /// Error type returned by ADC methods
+    type Error;
+
+    /// Request that the ADC begin a conversion on the specified pin
+    ///
+    /// This method takes a `Pin` reference, as it is expected that the ADC will be able to sample
+    /// whatever channel underlies the pin.
+    fn read(&mut self, pin: &mut Pin) -> nb::Result<Word, Self::Error>;
+}