feat: add display UI with splash screen, dashboard, and RSSI sparkline

Implement full SSD1306 OLED display support:
- Splash screen on boot (1.5s) with project name, version, board
- Dashboard showing radio state, config, counters, RSSI/SNR
- RSSI history sparkline (64-sample ring buffer, 2px-wide bars)
- DisplayOn/DisplayOff host commands routed via dedicated channel
- Pure render functions against generic DrawTarget (no hardware coupling)
- Display on/off control bypasses radio task entirely

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

vendor/nrf52832-pac/src/p0/detectmode.rs

@@ -0,0 +1,127 @@
+#[doc = "Register `DETECTMODE` reader"]
+pub struct R(crate::R<DETECTMODE_SPEC>);
+impl core::ops::Deref for R {
+    type Target = crate::R<DETECTMODE_SPEC>;
+    #[inline(always)]
+    fn deref(&self) -> &Self::Target {
+        &self.0
+    }
+}
+impl From<crate::R<DETECTMODE_SPEC>> for R {
+    #[inline(always)]
+    fn from(reader: crate::R<DETECTMODE_SPEC>) -> Self {
+        R(reader)
+    }
+}
+#[doc = "Register `DETECTMODE` writer"]
+pub struct W(crate::W<DETECTMODE_SPEC>);
+impl core::ops::Deref for W {
+    type Target = crate::W<DETECTMODE_SPEC>;
+    #[inline(always)]
+    fn deref(&self) -> &Self::Target {
+        &self.0
+    }
+}
+impl core::ops::DerefMut for W {
+    #[inline(always)]
+    fn deref_mut(&mut self) -> &mut Self::Target {
+        &mut self.0
+    }
+}
+impl From<crate::W<DETECTMODE_SPEC>> for W {
+    #[inline(always)]
+    fn from(writer: crate::W<DETECTMODE_SPEC>) -> Self {
+        W(writer)
+    }
+}
+#[doc = "Field `DETECTMODE` reader - Select between default DETECT signal behaviour and LDETECT mode"]
+pub type DETECTMODE_R = crate::BitReader<DETECTMODE_A>;
+#[doc = "Select between default DETECT signal behaviour and LDETECT mode\n\nValue on reset: 0"]
+#[derive(Clone, Copy, Debug, PartialEq)]
+pub enum DETECTMODE_A {
+    #[doc = "0: DETECT directly connected to PIN DETECT signals"]
+    DEFAULT = 0,
+    #[doc = "1: Use the latched LDETECT behaviour"]
+    LDETECT = 1,
+}
+impl From<DETECTMODE_A> for bool {
+    #[inline(always)]
+    fn from(variant: DETECTMODE_A) -> Self {
+        variant as u8 != 0
+    }
+}
+impl DETECTMODE_R {
+    #[doc = "Get enumerated values variant"]
+    #[inline(always)]
+    pub fn variant(&self) -> DETECTMODE_A {
+        match self.bits {
+            false => DETECTMODE_A::DEFAULT,
+            true => DETECTMODE_A::LDETECT,
+        }
+    }
+    #[doc = "Checks if the value of the field is `DEFAULT`"]
+    #[inline(always)]
+    pub fn is_default(&self) -> bool {
+        *self == DETECTMODE_A::DEFAULT
+    }
+    #[doc = "Checks if the value of the field is `LDETECT`"]
+    #[inline(always)]
+    pub fn is_ldetect(&self) -> bool {
+        *self == DETECTMODE_A::LDETECT
+    }
+}
+#[doc = "Field `DETECTMODE` writer - Select between default DETECT signal behaviour and LDETECT mode"]
+pub type DETECTMODE_W<'a, const O: u8> =
+    crate::BitWriter<'a, u32, DETECTMODE_SPEC, DETECTMODE_A, O>;
+impl<'a, const O: u8> DETECTMODE_W<'a, O> {
+    #[doc = "DETECT directly connected to PIN DETECT signals"]
+    #[inline(always)]
+    pub fn default(self) -> &'a mut W {
+        self.variant(DETECTMODE_A::DEFAULT)
+    }
+    #[doc = "Use the latched LDETECT behaviour"]
+    #[inline(always)]
+    pub fn ldetect(self) -> &'a mut W {
+        self.variant(DETECTMODE_A::LDETECT)
+    }
+}
+impl R {
+    #[doc = "Bit 0 - Select between default DETECT signal behaviour and LDETECT mode"]
+    #[inline(always)]
+    pub fn detectmode(&self) -> DETECTMODE_R {
+        DETECTMODE_R::new((self.bits & 1) != 0)
+    }
+}
+impl W {
+    #[doc = "Bit 0 - Select between default DETECT signal behaviour and LDETECT mode"]
+    #[inline(always)]
+    pub fn detectmode(&mut self) -> DETECTMODE_W<0> {
+        DETECTMODE_W::new(self)
+    }
+    #[doc = "Writes raw bits to the register."]
+    #[inline(always)]
+    pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
+        self.0.bits(bits);
+        self
+    }
+}
+#[doc = "Select between default DETECT signal behaviour and LDETECT mode\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [detectmode](index.html) module"]
+pub struct DETECTMODE_SPEC;
+impl crate::RegisterSpec for DETECTMODE_SPEC {
+    type Ux = u32;
+}
+#[doc = "`read()` method returns [detectmode::R](R) reader structure"]
+impl crate::Readable for DETECTMODE_SPEC {
+    type Reader = R;
+}
+#[doc = "`write(|w| ..)` method takes [detectmode::W](W) writer structure"]
+impl crate::Writable for DETECTMODE_SPEC {
+    type Writer = W;
+}
+#[doc = "`reset()` method sets DETECTMODE to value 0"]
+impl crate::Resettable for DETECTMODE_SPEC {
+    #[inline(always)]
+    fn reset_value() -> Self::Ux {
+        0
+    }
+}

vendor/nrf52832-pac/src/p0/pin_cnf.rs

@@ -0,0 +1,478 @@
+#[doc = "Register `PIN_CNF[%s]` reader"]
+pub struct R(crate::R<PIN_CNF_SPEC>);
+impl core::ops::Deref for R {
+    type Target = crate::R<PIN_CNF_SPEC>;
+    #[inline(always)]
+    fn deref(&self) -> &Self::Target {
+        &self.0
+    }
+}
+impl From<crate::R<PIN_CNF_SPEC>> for R {
+    #[inline(always)]
+    fn from(reader: crate::R<PIN_CNF_SPEC>) -> Self {
+        R(reader)
+    }
+}
+#[doc = "Register `PIN_CNF[%s]` writer"]
+pub struct W(crate::W<PIN_CNF_SPEC>);
+impl core::ops::Deref for W {
+    type Target = crate::W<PIN_CNF_SPEC>;
+    #[inline(always)]
+    fn deref(&self) -> &Self::Target {
+        &self.0
+    }
+}
+impl core::ops::DerefMut for W {
+    #[inline(always)]
+    fn deref_mut(&mut self) -> &mut Self::Target {
+        &mut self.0
+    }
+}
+impl From<crate::W<PIN_CNF_SPEC>> for W {
+    #[inline(always)]
+    fn from(writer: crate::W<PIN_CNF_SPEC>) -> Self {
+        W(writer)
+    }
+}
+#[doc = "Field `DIR` reader - Pin direction. Same physical register as DIR register"]
+pub type DIR_R = crate::BitReader<DIR_A>;
+#[doc = "Pin direction. Same physical register as DIR register\n\nValue on reset: 0"]
+#[derive(Clone, Copy, Debug, PartialEq)]
+pub enum DIR_A {
+    #[doc = "0: Configure pin as an input pin"]
+    INPUT = 0,
+    #[doc = "1: Configure pin as an output pin"]
+    OUTPUT = 1,
+}
+impl From<DIR_A> for bool {
+    #[inline(always)]
+    fn from(variant: DIR_A) -> Self {
+        variant as u8 != 0
+    }
+}
+impl DIR_R {
+    #[doc = "Get enumerated values variant"]
+    #[inline(always)]
+    pub fn variant(&self) -> DIR_A {
+        match self.bits {
+            false => DIR_A::INPUT,
+            true => DIR_A::OUTPUT,
+        }
+    }
+    #[doc = "Checks if the value of the field is `INPUT`"]
+    #[inline(always)]
+    pub fn is_input(&self) -> bool {
+        *self == DIR_A::INPUT
+    }
+    #[doc = "Checks if the value of the field is `OUTPUT`"]
+    #[inline(always)]
+    pub fn is_output(&self) -> bool {
+        *self == DIR_A::OUTPUT
+    }
+}
+#[doc = "Field `DIR` writer - Pin direction. Same physical register as DIR register"]
+pub type DIR_W<'a, const O: u8> = crate::BitWriter<'a, u32, PIN_CNF_SPEC, DIR_A, O>;
+impl<'a, const O: u8> DIR_W<'a, O> {
+    #[doc = "Configure pin as an input pin"]
+    #[inline(always)]
+    pub fn input(self) -> &'a mut W {
+        self.variant(DIR_A::INPUT)
+    }
+    #[doc = "Configure pin as an output pin"]
+    #[inline(always)]
+    pub fn output(self) -> &'a mut W {
+        self.variant(DIR_A::OUTPUT)
+    }
+}
+#[doc = "Field `INPUT` reader - Connect or disconnect input buffer"]
+pub type INPUT_R = crate::BitReader<INPUT_A>;
+#[doc = "Connect or disconnect input buffer\n\nValue on reset: 1"]
+#[derive(Clone, Copy, Debug, PartialEq)]
+pub enum INPUT_A {
+    #[doc = "0: Connect input buffer"]
+    CONNECT = 0,
+    #[doc = "1: Disconnect input buffer"]
+    DISCONNECT = 1,
+}
+impl From<INPUT_A> for bool {
+    #[inline(always)]
+    fn from(variant: INPUT_A) -> Self {
+        variant as u8 != 0
+    }
+}
+impl INPUT_R {
+    #[doc = "Get enumerated values variant"]
+    #[inline(always)]
+    pub fn variant(&self) -> INPUT_A {
+        match self.bits {
+            false => INPUT_A::CONNECT,
+            true => INPUT_A::DISCONNECT,
+        }
+    }
+    #[doc = "Checks if the value of the field is `CONNECT`"]
+    #[inline(always)]
+    pub fn is_connect(&self) -> bool {
+        *self == INPUT_A::CONNECT
+    }
+    #[doc = "Checks if the value of the field is `DISCONNECT`"]
+    #[inline(always)]
+    pub fn is_disconnect(&self) -> bool {
+        *self == INPUT_A::DISCONNECT
+    }
+}
+#[doc = "Field `INPUT` writer - Connect or disconnect input buffer"]
+pub type INPUT_W<'a, const O: u8> = crate::BitWriter<'a, u32, PIN_CNF_SPEC, INPUT_A, O>;
+impl<'a, const O: u8> INPUT_W<'a, O> {
+    #[doc = "Connect input buffer"]
+    #[inline(always)]
+    pub fn connect(self) -> &'a mut W {
+        self.variant(INPUT_A::CONNECT)
+    }
+    #[doc = "Disconnect input buffer"]
+    #[inline(always)]
+    pub fn disconnect(self) -> &'a mut W {
+        self.variant(INPUT_A::DISCONNECT)
+    }
+}
+#[doc = "Field `PULL` reader - Pull configuration"]
+pub type PULL_R = crate::FieldReader<u8, PULL_A>;
+#[doc = "Pull configuration\n\nValue on reset: 0"]
+#[derive(Clone, Copy, Debug, PartialEq)]
+#[repr(u8)]
+pub enum PULL_A {
+    #[doc = "0: No pull"]
+    DISABLED = 0,
+    #[doc = "1: Pull down on pin"]
+    PULLDOWN = 1,
+    #[doc = "3: Pull up on pin"]
+    PULLUP = 3,
+}
+impl From<PULL_A> for u8 {
+    #[inline(always)]
+    fn from(variant: PULL_A) -> Self {
+        variant as _
+    }
+}
+impl PULL_R {
+    #[doc = "Get enumerated values variant"]
+    #[inline(always)]
+    pub fn variant(&self) -> Option<PULL_A> {
+        match self.bits {
+            0 => Some(PULL_A::DISABLED),
+            1 => Some(PULL_A::PULLDOWN),
+            3 => Some(PULL_A::PULLUP),
+            _ => None,
+        }
+    }
+    #[doc = "Checks if the value of the field is `DISABLED`"]
+    #[inline(always)]
+    pub fn is_disabled(&self) -> bool {
+        *self == PULL_A::DISABLED
+    }
+    #[doc = "Checks if the value of the field is `PULLDOWN`"]
+    #[inline(always)]
+    pub fn is_pulldown(&self) -> bool {
+        *self == PULL_A::PULLDOWN
+    }
+    #[doc = "Checks if the value of the field is `PULLUP`"]
+    #[inline(always)]
+    pub fn is_pullup(&self) -> bool {
+        *self == PULL_A::PULLUP
+    }
+}
+#[doc = "Field `PULL` writer - Pull configuration"]
+pub type PULL_W<'a, const O: u8> = crate::FieldWriter<'a, u32, PIN_CNF_SPEC, u8, PULL_A, 2, O>;
+impl<'a, const O: u8> PULL_W<'a, O> {
+    #[doc = "No pull"]
+    #[inline(always)]
+    pub fn disabled(self) -> &'a mut W {
+        self.variant(PULL_A::DISABLED)
+    }
+    #[doc = "Pull down on pin"]
+    #[inline(always)]
+    pub fn pulldown(self) -> &'a mut W {
+        self.variant(PULL_A::PULLDOWN)
+    }
+    #[doc = "Pull up on pin"]
+    #[inline(always)]
+    pub fn pullup(self) -> &'a mut W {
+        self.variant(PULL_A::PULLUP)
+    }
+}
+#[doc = "Field `DRIVE` reader - Drive configuration"]
+pub type DRIVE_R = crate::FieldReader<u8, DRIVE_A>;
+#[doc = "Drive configuration\n\nValue on reset: 0"]
+#[derive(Clone, Copy, Debug, PartialEq)]
+#[repr(u8)]
+pub enum DRIVE_A {
+    #[doc = "0: Standard '0', standard '1'"]
+    S0S1 = 0,
+    #[doc = "1: High drive '0', standard '1'"]
+    H0S1 = 1,
+    #[doc = "2: Standard '0', high drive '1'"]
+    S0H1 = 2,
+    #[doc = "3: High drive '0', high 'drive '1''"]
+    H0H1 = 3,
+    #[doc = "4: Disconnect '0' standard '1' (normally used for wired-or connections)"]
+    D0S1 = 4,
+    #[doc = "5: Disconnect '0', high drive '1' (normally used for wired-or connections)"]
+    D0H1 = 5,
+    #[doc = "6: Standard '0'. disconnect '1' (normally used for wired-and connections)"]
+    S0D1 = 6,
+    #[doc = "7: High drive '0', disconnect '1' (normally used for wired-and connections)"]
+    H0D1 = 7,
+}
+impl From<DRIVE_A> for u8 {
+    #[inline(always)]
+    fn from(variant: DRIVE_A) -> Self {
+        variant as _
+    }
+}
+impl DRIVE_R {
+    #[doc = "Get enumerated values variant"]
+    #[inline(always)]
+    pub fn variant(&self) -> DRIVE_A {
+        match self.bits {
+            0 => DRIVE_A::S0S1,
+            1 => DRIVE_A::H0S1,
+            2 => DRIVE_A::S0H1,
+            3 => DRIVE_A::H0H1,
+            4 => DRIVE_A::D0S1,
+            5 => DRIVE_A::D0H1,
+            6 => DRIVE_A::S0D1,
+            7 => DRIVE_A::H0D1,
+            _ => unreachable!(),
+        }
+    }
+    #[doc = "Checks if the value of the field is `S0S1`"]
+    #[inline(always)]
+    pub fn is_s0s1(&self) -> bool {
+        *self == DRIVE_A::S0S1
+    }
+    #[doc = "Checks if the value of the field is `H0S1`"]
+    #[inline(always)]
+    pub fn is_h0s1(&self) -> bool {
+        *self == DRIVE_A::H0S1
+    }
+    #[doc = "Checks if the value of the field is `S0H1`"]
+    #[inline(always)]
+    pub fn is_s0h1(&self) -> bool {
+        *self == DRIVE_A::S0H1
+    }
+    #[doc = "Checks if the value of the field is `H0H1`"]
+    #[inline(always)]
+    pub fn is_h0h1(&self) -> bool {
+        *self == DRIVE_A::H0H1
+    }
+    #[doc = "Checks if the value of the field is `D0S1`"]
+    #[inline(always)]
+    pub fn is_d0s1(&self) -> bool {
+        *self == DRIVE_A::D0S1
+    }
+    #[doc = "Checks if the value of the field is `D0H1`"]
+    #[inline(always)]
+    pub fn is_d0h1(&self) -> bool {
+        *self == DRIVE_A::D0H1
+    }
+    #[doc = "Checks if the value of the field is `S0D1`"]
+    #[inline(always)]
+    pub fn is_s0d1(&self) -> bool {
+        *self == DRIVE_A::S0D1
+    }
+    #[doc = "Checks if the value of the field is `H0D1`"]
+    #[inline(always)]
+    pub fn is_h0d1(&self) -> bool {
+        *self == DRIVE_A::H0D1
+    }
+}
+#[doc = "Field `DRIVE` writer - Drive configuration"]
+pub type DRIVE_W<'a, const O: u8> =
+    crate::FieldWriterSafe<'a, u32, PIN_CNF_SPEC, u8, DRIVE_A, 3, O>;
+impl<'a, const O: u8> DRIVE_W<'a, O> {
+    #[doc = "Standard '0', standard '1'"]
+    #[inline(always)]
+    pub fn s0s1(self) -> &'a mut W {
+        self.variant(DRIVE_A::S0S1)
+    }
+    #[doc = "High drive '0', standard '1'"]
+    #[inline(always)]
+    pub fn h0s1(self) -> &'a mut W {
+        self.variant(DRIVE_A::H0S1)
+    }
+    #[doc = "Standard '0', high drive '1'"]
+    #[inline(always)]
+    pub fn s0h1(self) -> &'a mut W {
+        self.variant(DRIVE_A::S0H1)
+    }
+    #[doc = "High drive '0', high 'drive '1''"]
+    #[inline(always)]
+    pub fn h0h1(self) -> &'a mut W {
+        self.variant(DRIVE_A::H0H1)
+    }
+    #[doc = "Disconnect '0' standard '1' (normally used for wired-or connections)"]
+    #[inline(always)]
+    pub fn d0s1(self) -> &'a mut W {
+        self.variant(DRIVE_A::D0S1)
+    }
+    #[doc = "Disconnect '0', high drive '1' (normally used for wired-or connections)"]
+    #[inline(always)]
+    pub fn d0h1(self) -> &'a mut W {
+        self.variant(DRIVE_A::D0H1)
+    }
+    #[doc = "Standard '0'. disconnect '1' (normally used for wired-and connections)"]
+    #[inline(always)]
+    pub fn s0d1(self) -> &'a mut W {
+        self.variant(DRIVE_A::S0D1)
+    }
+    #[doc = "High drive '0', disconnect '1' (normally used for wired-and connections)"]
+    #[inline(always)]
+    pub fn h0d1(self) -> &'a mut W {
+        self.variant(DRIVE_A::H0D1)
+    }
+}
+#[doc = "Field `SENSE` reader - Pin sensing mechanism"]
+pub type SENSE_R = crate::FieldReader<u8, SENSE_A>;
+#[doc = "Pin sensing mechanism\n\nValue on reset: 0"]
+#[derive(Clone, Copy, Debug, PartialEq)]
+#[repr(u8)]
+pub enum SENSE_A {
+    #[doc = "0: Disabled"]
+    DISABLED = 0,
+    #[doc = "2: Sense for high level"]
+    HIGH = 2,
+    #[doc = "3: Sense for low level"]
+    LOW = 3,
+}
+impl From<SENSE_A> for u8 {
+    #[inline(always)]
+    fn from(variant: SENSE_A) -> Self {
+        variant as _
+    }
+}
+impl SENSE_R {
+    #[doc = "Get enumerated values variant"]
+    #[inline(always)]
+    pub fn variant(&self) -> Option<SENSE_A> {
+        match self.bits {
+            0 => Some(SENSE_A::DISABLED),
+            2 => Some(SENSE_A::HIGH),
+            3 => Some(SENSE_A::LOW),
+            _ => None,
+        }
+    }
+    #[doc = "Checks if the value of the field is `DISABLED`"]
+    #[inline(always)]
+    pub fn is_disabled(&self) -> bool {
+        *self == SENSE_A::DISABLED
+    }
+    #[doc = "Checks if the value of the field is `HIGH`"]
+    #[inline(always)]
+    pub fn is_high(&self) -> bool {
+        *self == SENSE_A::HIGH
+    }
+    #[doc = "Checks if the value of the field is `LOW`"]
+    #[inline(always)]
+    pub fn is_low(&self) -> bool {
+        *self == SENSE_A::LOW
+    }
+}
+#[doc = "Field `SENSE` writer - Pin sensing mechanism"]
+pub type SENSE_W<'a, const O: u8> = crate::FieldWriter<'a, u32, PIN_CNF_SPEC, u8, SENSE_A, 2, O>;
+impl<'a, const O: u8> SENSE_W<'a, O> {
+    #[doc = "Disabled"]
+    #[inline(always)]
+    pub fn disabled(self) -> &'a mut W {
+        self.variant(SENSE_A::DISABLED)
+    }
+    #[doc = "Sense for high level"]
+    #[inline(always)]
+    pub fn high(self) -> &'a mut W {
+        self.variant(SENSE_A::HIGH)
+    }
+    #[doc = "Sense for low level"]
+    #[inline(always)]
+    pub fn low(self) -> &'a mut W {
+        self.variant(SENSE_A::LOW)
+    }
+}
+impl R {
+    #[doc = "Bit 0 - Pin direction. Same physical register as DIR register"]
+    #[inline(always)]
+    pub fn dir(&self) -> DIR_R {
+        DIR_R::new((self.bits & 1) != 0)
+    }
+    #[doc = "Bit 1 - Connect or disconnect input buffer"]
+    #[inline(always)]
+    pub fn input(&self) -> INPUT_R {
+        INPUT_R::new(((self.bits >> 1) & 1) != 0)
+    }
+    #[doc = "Bits 2:3 - Pull configuration"]
+    #[inline(always)]
+    pub fn pull(&self) -> PULL_R {
+        PULL_R::new(((self.bits >> 2) & 3) as u8)
+    }
+    #[doc = "Bits 8:10 - Drive configuration"]
+    #[inline(always)]
+    pub fn drive(&self) -> DRIVE_R {
+        DRIVE_R::new(((self.bits >> 8) & 7) as u8)
+    }
+    #[doc = "Bits 16:17 - Pin sensing mechanism"]
+    #[inline(always)]
+    pub fn sense(&self) -> SENSE_R {
+        SENSE_R::new(((self.bits >> 16) & 3) as u8)
+    }
+}
+impl W {
+    #[doc = "Bit 0 - Pin direction. Same physical register as DIR register"]
+    #[inline(always)]
+    pub fn dir(&mut self) -> DIR_W<0> {
+        DIR_W::new(self)
+    }
+    #[doc = "Bit 1 - Connect or disconnect input buffer"]
+    #[inline(always)]
+    pub fn input(&mut self) -> INPUT_W<1> {
+        INPUT_W::new(self)
+    }
+    #[doc = "Bits 2:3 - Pull configuration"]
+    #[inline(always)]
+    pub fn pull(&mut self) -> PULL_W<2> {
+        PULL_W::new(self)
+    }
+    #[doc = "Bits 8:10 - Drive configuration"]
+    #[inline(always)]
+    pub fn drive(&mut self) -> DRIVE_W<8> {
+        DRIVE_W::new(self)
+    }
+    #[doc = "Bits 16:17 - Pin sensing mechanism"]
+    #[inline(always)]
+    pub fn sense(&mut self) -> SENSE_W<16> {
+        SENSE_W::new(self)
+    }
+    #[doc = "Writes raw bits to the register."]
+    #[inline(always)]
+    pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
+        self.0.bits(bits);
+        self
+    }
+}
+#[doc = "Description collection\\[0\\]: Configuration of GPIO pins\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [pin_cnf](index.html) module"]
+pub struct PIN_CNF_SPEC;
+impl crate::RegisterSpec for PIN_CNF_SPEC {
+    type Ux = u32;
+}
+#[doc = "`read()` method returns [pin_cnf::R](R) reader structure"]
+impl crate::Readable for PIN_CNF_SPEC {
+    type Reader = R;
+}
+#[doc = "`write(|w| ..)` method takes [pin_cnf::W](W) writer structure"]
+impl crate::Writable for PIN_CNF_SPEC {
+    type Writer = W;
+}
+#[doc = "`reset()` method sets PIN_CNF[%s]
+to value 0x02"]
+impl crate::Resettable for PIN_CNF_SPEC {
+    #[inline(always)]
+    fn reset_value() -> Self::Ux {
+        0x02
+    }
+}