feat: per-board TX power range, TX_POWER_MAX sentinel (-128)

- Each board exports TX_POWER_RANGE constant (min, max dBm)
- RadioConfig::validate() uses the board's range, not hardcoded limits
- TX_POWER_MAX sentinel (-128 on the wire) means "use board's maximum"
  — resolved to the actual max before storing config
- GetConfig returns the resolved actual power, not the sentinel
- Default configs in examples use TX_POWER_MAX
- Protocol docs updated

examples/donglora.py

@@ -197,12 +197,15 @@ def connect(port: str | None = None, timeout: float = 2.0) -> serial.Serial:
     return ser
 
 
-# Default radio config: 915 MHz, 125 kHz BW, SF7, CR 4/5
+# Sentinel: set TX power to the board's maximum
+TX_POWER_MAX = -128  # i8::MIN on the wire
+
+# Default radio config: 915 MHz, 125 kHz BW, SF7, CR 4/5, max power
 DEFAULT_CONFIG = {
     "freq_hz": 915_000_000,
     "bw": 7,        # 125 kHz
     "sf": 7,
     "cr": 5,         # CR 4/5
     "sync_word": 0x1424,
-    "tx_power_dbm": 14,
+    "tx_power_dbm": TX_POWER_MAX,
 }

examples/meshcore/meshcore_rx.py

@@ -916,7 +916,7 @@ RADIO_CONFIG = {
     "sf": 7,
     "cr": 5,  # CR 4/5 — denominator value
     "sync_word": 0x3444,
-    "tx_power_dbm": 14,
+    "tx_power_dbm": -128,  # TX_POWER_MAX: use board's maximum
 }