Switch all ESP32-S3 boards from UsbSerialJtag to USB OTG CDC-ACM via
embassy-usb. The USB device stack is now shared code — boards only
provide the platform-specific embassy-usb Driver.
- Custom VID:PID 1209:5741 (open-source VID, "WA" PID)
- CDC-ACM class with proper device enumeration
- COBS+postcard protocol over CDC-ACM packet read/write
- Concurrent USB device loop + protocol loop via join()
- On disconnect: sends DisplayCommand::Reset to show "Waiting for host..."
- Justfile: espflash no longer uses --monitor (OTG steals PHY)
- Test script updated to detect by new VID:PID
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Fix CodingRate encoding: postcard uses 0-based variant index, not
repr(u8) value. CR 4/5 is variant 0, not 1.
- Shorten RSSI/SNR display line to fit 21-char width
- Python script auto-detects DongLoRa by USB VID:PID (303a:1001),
reconnects on device reset/disconnect, no more crash on RST
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Protocol:
- SetConfig, StartRx, StopRx now send Response::Ok on success
(host was timing out waiting for acks that never came)
Display:
- Full frequency precision: 910.525MHz not 910.5MHz
- Full bandwidth labels: 62.5kHz not 62k
- RSSI/SNR row shows units (dBm, dB)
- Separator line moved down 3px to give RSSI/SNR breathing room
- Sparkline is now time-based: each bar = 1 second, scrolls left,
showing ~1 minute of RSSI history. Empty slots = no packets.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
swaitsandClaude Opus 4.6