CodingRate was an enum with repr(u8) values that didn't match postcard's
wire encoding (variant index). Instead of papering over the mismatch,
make cr a plain u8 in RadioConfig. Host sends the denominator directly:
5 for CR 4/5, 6 for CR 4/6, etc. No lookup tables, no index confusion.
Remove CodingRate enum, cr_denom() helper, and the Bandwidth import that
was only needed for cr_denom. ErrorCode repr values also fixed to 0-based.
Firmware:
- fix(protocol): SNR type i8→i16 to match lora_phy PacketStatus
- fix(display): combine splash + waiting into one screen
- fix(display): move TX power to row 0 right-justified
- feat(display): sparkline distinguishes TX from RX — TX bars are dotted
(alternating pixel rows), RX bars are solid. TX-only slots show a short
marker. TX takes precedence over RX in the same time slot.
Host tool (tools/meshcore_rx.py):
- feat: full MeshCore packet decoder with colored ANSI output
- feat: GRP_TXT decryption using 276 channels from channels.csv
- feat: Watchman loop/collision reporter to #watchman
- feat: ADVERT-informed node registry with 12h TTL persistence
- feat: transport code fallback for older MeshCore firmware
- fix: robust error handling for long-running operation
- fix: collision detection uses evidence-based reasoning from advert cache
Channel directory (tools/channels.csv): 276 channels
Test corpus (corpus/): JSON Schema, 28 hand-crafted vectors, Hypothesis generator
- Fix CodingRate encoding: postcard uses 0-based variant index, not
repr(u8) value. CR 4/5 is variant 0, not 1.
- Shorten RSSI/SNR display line to fit 21-char width
- Python script auto-detects DongLoRa by USB VID:PID (303a:1001),
reconnects on device reset/disconnect, no more crash on RST
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Protocol:
- SetConfig, StartRx, StopRx now send Response::Ok on success
(host was timing out waiting for acks that never came)
Display:
- Full frequency precision: 910.525MHz not 910.5MHz
- Full bandwidth labels: 62.5kHz not 62k
- RSSI/SNR row shows units (dBm, dB)
- Separator line moved down 3px to give RSSI/SNR breathing room
- Sparkline is now time-based: each bar = 1 second, scrolls left,
showing ~1 minute of RSSI history. Empty slots = no packets.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Rebrand from lora-dongle to DongLoRa (portmanteau of dongle + LoRa).
Lowercase donglora in Cargo package name, firmware filenames, and code.
Splash screen shows "DongLoRa" in 9x15 bold.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Implement full SSD1306 OLED display support:
- Splash screen on boot (1.5s) with project name, version, board
- Dashboard showing radio state, config, counters, RSSI/SNR
- RSSI history sparkline (64-sample ring buffer, 2px-wide bars)
- DisplayOn/DisplayOff host commands routed via dedicated channel
- Pure render functions against generic DrawTarget (no hardware coupling)
- Display on/off control bypasses radio task entirely
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Heltec V3 (ESP32-S3) requires the espup Xtensa toolchain fork, which
violates the standard-toolchain-only principle. Removed until upstream
Rust supports Xtensa targets via stock rustup.
Also removes all #[allow(dead_code)] band-aids — unused items are
deleted rather than suppressed. DESIGN.md updated with standard
toolchain principle (#10) and peripheral model (input/telemetry slots).
swaits
