- Poll DTR every 250ms via select3 timer arm (read_packet blocks
forever after host closes port, so DTR check must not depend on it)
- DTR drop → send DisplayCommand::Reset (blocking send, not try_send)
- DTR rise → send DisplayCommand::On
- Display task: disconnected flag ignores StatusWatch while set,
preventing stale radio status from overriding the idle screen
- On reconnect, display grabs current RadioStatus from watch and
renders dashboard immediately (no waiting for next radio event)
- Simplified clippy to use _cargo helper
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Switch all ESP32-S3 boards from UsbSerialJtag to USB OTG CDC-ACM via
embassy-usb. The USB device stack is now shared code — boards only
provide the platform-specific embassy-usb Driver.
- Custom VID:PID 1209:5741 (open-source VID, "WA" PID)
- CDC-ACM class with proper device enumeration
- COBS+postcard protocol over CDC-ACM packet read/write
- Concurrent USB device loop + protocol loop via join()
- On disconnect: sends DisplayCommand::Reset to show "Waiting for host..."
- Justfile: espflash no longer uses --monitor (OTG steals PHY)
- Test script updated to detect by new VID:PID
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Wire up UsbSerialJtag on ESP32-S3 boards for host communication:
- Read COBS-framed postcard commands from host via serial
- Route DisplayOn/Off to display task, everything else to radio
- Serialize responses back to host as COBS frames
- Use postcard::CobsAccumulator for chunked deserialization
- Concurrent read/write via embassy select
RAK nRF52840 USB (embassy-usb CDC-ACM) is still a stub — different
init path, will be implemented separately.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Implement full SSD1306 OLED display support:
- Splash screen on boot (1.5s) with project name, version, board
- Dashboard showing radio state, config, counters, RSSI/SNR
- RSSI history sparkline (64-sample ring buffer, 2px-wide bars)
- DisplayOn/DisplayOff host commands routed via dedicated channel
- Pure render functions against generic DrawTarget (no hardware coupling)
- Display on/off control bypasses radio task entirely
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
swaitsandClaude Opus 4.6