#[doc = "Register `BROWN_OUT` reader"] pub type R = crate::R; #[doc = "Register `BROWN_OUT` writer"] pub type W = crate::W; #[doc = "Field `BROWN_OUT_INT_WAIT` reader - brown out interrupt wait cycles"] pub type BROWN_OUT_INT_WAIT_R = crate::FieldReader; #[doc = "Field `BROWN_OUT_INT_WAIT` writer - brown out interrupt wait cycles"] pub type BROWN_OUT_INT_WAIT_W<'a, REG> = crate::FieldWriter<'a, REG, 10, u16>; #[doc = "Field `BROWN_OUT_CLOSE_FLASH_ENA` reader - enable close flash when brown out happens"] pub type BROWN_OUT_CLOSE_FLASH_ENA_R = crate::BitReader; #[doc = "Field `BROWN_OUT_CLOSE_FLASH_ENA` writer - enable close flash when brown out happens"] pub type BROWN_OUT_CLOSE_FLASH_ENA_W<'a, REG> = crate::BitWriter<'a, REG>; #[doc = "Field `BROWN_OUT_PD_RF_ENA` reader - enable power down RF when brown out happens"] pub type BROWN_OUT_PD_RF_ENA_R = crate::BitReader; #[doc = "Field `BROWN_OUT_PD_RF_ENA` writer - enable power down RF when brown out happens"] pub type BROWN_OUT_PD_RF_ENA_W<'a, REG> = crate::BitWriter<'a, REG>; #[doc = "Field `BROWN_OUT_RST_WAIT` reader - brown out reset wait cycles"] pub type BROWN_OUT_RST_WAIT_R = crate::FieldReader; #[doc = "Field `BROWN_OUT_RST_WAIT` writer - brown out reset wait cycles"] pub type BROWN_OUT_RST_WAIT_W<'a, REG> = crate::FieldWriter<'a, REG, 10, u16>; #[doc = "Field `BROWN_OUT_RST_ENA` reader - enable brown out reset"] pub type BROWN_OUT_RST_ENA_R = crate::BitReader; #[doc = "Field `BROWN_OUT_RST_ENA` writer - enable brown out reset"] pub type BROWN_OUT_RST_ENA_W<'a, REG> = crate::BitWriter<'a, REG>; #[doc = "Field `BROWN_OUT_RST_SEL` reader - 1: 4-pos reset, 0: sys_reset"] pub type BROWN_OUT_RST_SEL_R = crate::BitReader; #[doc = "Field `BROWN_OUT_RST_SEL` writer - 1: 4-pos reset, 0: sys_reset"] pub type BROWN_OUT_RST_SEL_W<'a, REG> = crate::BitWriter<'a, REG>; #[doc = "Field `BROWN_OUT_ANA_RST_EN` reader - enable brown out reset en"] pub type BROWN_OUT_ANA_RST_EN_R = crate::BitReader; #[doc = "Field `BROWN_OUT_ANA_RST_EN` writer - enable brown out reset en"] pub type BROWN_OUT_ANA_RST_EN_W<'a, REG> = crate::BitWriter<'a, REG>; #[doc = "Field `BROWN_OUT_CNT_CLR` writer - clear brown out counter"] pub type BROWN_OUT_CNT_CLR_W<'a, REG> = crate::BitWriter<'a, REG>; #[doc = "Field `BROWN_OUT_ENA` reader - enable brown out"] pub type BROWN_OUT_ENA_R = crate::BitReader; #[doc = "Field `BROWN_OUT_ENA` writer - enable brown out"] pub type BROWN_OUT_ENA_W<'a, REG> = crate::BitWriter<'a, REG>; #[doc = "Field `DET` reader - get brown out detect"] pub type DET_R = crate::BitReader; impl R { #[doc = "Bits 4:13 - brown out interrupt wait cycles"] #[inline(always)] pub fn brown_out_int_wait(&self) -> BROWN_OUT_INT_WAIT_R { BROWN_OUT_INT_WAIT_R::new(((self.bits >> 4) & 0x03ff) as u16) } #[doc = "Bit 14 - enable close flash when brown out happens"] #[inline(always)] pub fn brown_out_close_flash_ena(&self) -> BROWN_OUT_CLOSE_FLASH_ENA_R { BROWN_OUT_CLOSE_FLASH_ENA_R::new(((self.bits >> 14) & 1) != 0) } #[doc = "Bit 15 - enable power down RF when brown out happens"] #[inline(always)] pub fn brown_out_pd_rf_ena(&self) -> BROWN_OUT_PD_RF_ENA_R { BROWN_OUT_PD_RF_ENA_R::new(((self.bits >> 15) & 1) != 0) } #[doc = "Bits 16:25 - brown out reset wait cycles"] #[inline(always)] pub fn brown_out_rst_wait(&self) -> BROWN_OUT_RST_WAIT_R { BROWN_OUT_RST_WAIT_R::new(((self.bits >> 16) & 0x03ff) as u16) } #[doc = "Bit 26 - enable brown out reset"] #[inline(always)] pub fn brown_out_rst_ena(&self) -> BROWN_OUT_RST_ENA_R { BROWN_OUT_RST_ENA_R::new(((self.bits >> 26) & 1) != 0) } #[doc = "Bit 27 - 1: 4-pos reset, 0: sys_reset"] #[inline(always)] pub fn brown_out_rst_sel(&self) -> BROWN_OUT_RST_SEL_R { BROWN_OUT_RST_SEL_R::new(((self.bits >> 27) & 1) != 0) } #[doc = "Bit 28 - enable brown out reset en"] #[inline(always)] pub fn brown_out_ana_rst_en(&self) -> BROWN_OUT_ANA_RST_EN_R { BROWN_OUT_ANA_RST_EN_R::new(((self.bits >> 28) & 1) != 0) } #[doc = "Bit 30 - enable brown out"] #[inline(always)] pub fn brown_out_ena(&self) -> BROWN_OUT_ENA_R { BROWN_OUT_ENA_R::new(((self.bits >> 30) & 1) != 0) } #[doc = "Bit 31 - get brown out detect"] #[inline(always)] pub fn det(&self) -> DET_R { DET_R::new(((self.bits >> 31) & 1) != 0) } } #[cfg(feature = "impl-register-debug")] impl core::fmt::Debug for R { fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result { f.debug_struct("BROWN_OUT") .field("brown_out_int_wait", &self.brown_out_int_wait()) .field( "brown_out_close_flash_ena", &self.brown_out_close_flash_ena(), ) .field("brown_out_pd_rf_ena", &self.brown_out_pd_rf_ena()) .field("brown_out_rst_wait", &self.brown_out_rst_wait()) .field("brown_out_rst_ena", &self.brown_out_rst_ena()) .field("brown_out_rst_sel", &self.brown_out_rst_sel()) .field("brown_out_ana_rst_en", &self.brown_out_ana_rst_en()) .field("brown_out_ena", &self.brown_out_ena()) .field("det", &self.det()) .finish() } } impl W { #[doc = "Bits 4:13 - brown out interrupt wait cycles"] #[inline(always)] pub fn brown_out_int_wait(&mut self) -> BROWN_OUT_INT_WAIT_W { BROWN_OUT_INT_WAIT_W::new(self, 4) } #[doc = "Bit 14 - enable close flash when brown out happens"] #[inline(always)] pub fn brown_out_close_flash_ena(&mut self) -> BROWN_OUT_CLOSE_FLASH_ENA_W { BROWN_OUT_CLOSE_FLASH_ENA_W::new(self, 14) } #[doc = "Bit 15 - enable power down RF when brown out happens"] #[inline(always)] pub fn brown_out_pd_rf_ena(&mut self) -> BROWN_OUT_PD_RF_ENA_W { BROWN_OUT_PD_RF_ENA_W::new(self, 15) } #[doc = "Bits 16:25 - brown out reset wait cycles"] #[inline(always)] pub fn brown_out_rst_wait(&mut self) -> BROWN_OUT_RST_WAIT_W { BROWN_OUT_RST_WAIT_W::new(self, 16) } #[doc = "Bit 26 - enable brown out reset"] #[inline(always)] pub fn brown_out_rst_ena(&mut self) -> BROWN_OUT_RST_ENA_W { BROWN_OUT_RST_ENA_W::new(self, 26) } #[doc = "Bit 27 - 1: 4-pos reset, 0: sys_reset"] #[inline(always)] pub fn brown_out_rst_sel(&mut self) -> BROWN_OUT_RST_SEL_W { BROWN_OUT_RST_SEL_W::new(self, 27) } #[doc = "Bit 28 - enable brown out reset en"] #[inline(always)] pub fn brown_out_ana_rst_en(&mut self) -> BROWN_OUT_ANA_RST_EN_W { BROWN_OUT_ANA_RST_EN_W::new(self, 28) } #[doc = "Bit 29 - clear brown out counter"] #[inline(always)] pub fn brown_out_cnt_clr(&mut self) -> BROWN_OUT_CNT_CLR_W { BROWN_OUT_CNT_CLR_W::new(self, 29) } #[doc = "Bit 30 - enable brown out"] #[inline(always)] pub fn brown_out_ena(&mut self) -> BROWN_OUT_ENA_W { BROWN_OUT_ENA_W::new(self, 30) } } #[doc = "congfigure brownout\n\nYou can [`read`](crate::Reg::read) this register and get [`brown_out::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`brown_out::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."] pub struct BROWN_OUT_SPEC; impl crate::RegisterSpec for BROWN_OUT_SPEC { type Ux = u32; } #[doc = "`read()` method returns [`brown_out::R`](R) reader structure"] impl crate::Readable for BROWN_OUT_SPEC {} #[doc = "`write(|w| ..)` method takes [`brown_out::W`](W) writer structure"] impl crate::Writable for BROWN_OUT_SPEC { type Safety = crate::Unsafe; const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0; const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0; } #[doc = "`reset()` method sets BROWN_OUT to value 0x43ff_0010"] impl crate::Resettable for BROWN_OUT_SPEC { const RESET_VALUE: u32 = 0x43ff_0010; }