#[repr(C)]
#[cfg_attr(feature = "impl-register-debug", derive(Debug))]
#[doc = "Register block"]
pub struct RegisterBlock {
    rtc_gpio_out: RTC_GPIO_OUT,
    rtc_gpio_out_w1ts: RTC_GPIO_OUT_W1TS,
    rtc_gpio_out_w1tc: RTC_GPIO_OUT_W1TC,
    rtc_gpio_enable: RTC_GPIO_ENABLE,
    rtc_gpio_enable_w1ts: RTC_GPIO_ENABLE_W1TS,
    enable_w1tc: ENABLE_W1TC,
    rtc_gpio_status: RTC_GPIO_STATUS,
    rtc_gpio_status_w1ts: RTC_GPIO_STATUS_W1TS,
    rtc_gpio_status_w1tc: RTC_GPIO_STATUS_W1TC,
    rtc_gpio_in: RTC_GPIO_IN,
    pin: [PIN; 22],
    rtc_debug_sel: RTC_DEBUG_SEL,
    touch_pad: [TOUCH_PAD; 15],
    xtal_32p_pad: XTAL_32P_PAD,
    xtal_32n_pad: XTAL_32N_PAD,
    pad_dac1: PAD_DAC1,
    pad_dac2: PAD_DAC2,
    rtc_pad19: RTC_PAD19,
    rtc_pad20: RTC_PAD20,
    rtc_pad21: RTC_PAD21,
    ext_wakeup0: EXT_WAKEUP0,
    xtl_ext_ctr: XTL_EXT_CTR,
    sar_i2c_io: SAR_I2C_IO,
    touch_ctrl: TOUCH_CTRL,
    _reserved24: [u8; 0x0110],
    date: DATE,
}
impl RegisterBlock {
    #[doc = "0x00 - RTC GPIO 0 ~ 21 output data register"]
    #[inline(always)]
    pub const fn rtc_gpio_out(&self) -> &RTC_GPIO_OUT {
        &self.rtc_gpio_out
    }
    #[doc = "0x04 - one set RTC GPIO output data"]
    #[inline(always)]
    pub const fn rtc_gpio_out_w1ts(&self) -> &RTC_GPIO_OUT_W1TS {
        &self.rtc_gpio_out_w1ts
    }
    #[doc = "0x08 - one clear RTC GPIO output data"]
    #[inline(always)]
    pub const fn rtc_gpio_out_w1tc(&self) -> &RTC_GPIO_OUT_W1TC {
        &self.rtc_gpio_out_w1tc
    }
    #[doc = "0x0c - Configure RTC GPIO output enable"]
    #[inline(always)]
    pub const fn rtc_gpio_enable(&self) -> &RTC_GPIO_ENABLE {
        &self.rtc_gpio_enable
    }
    #[doc = "0x10 - one set RTC GPIO output enable"]
    #[inline(always)]
    pub const fn rtc_gpio_enable_w1ts(&self) -> &RTC_GPIO_ENABLE_W1TS {
        &self.rtc_gpio_enable_w1ts
    }
    #[doc = "0x14 - one clear RTC GPIO output enable"]
    #[inline(always)]
    pub const fn enable_w1tc(&self) -> &ENABLE_W1TC {
        &self.enable_w1tc
    }
    #[doc = "0x18 - RTC GPIO 0 ~ 21 interrupt status"]
    #[inline(always)]
    pub const fn rtc_gpio_status(&self) -> &RTC_GPIO_STATUS {
        &self.rtc_gpio_status
    }
    #[doc = "0x1c - One set RTC GPIO 0 ~ 21 interrupt status"]
    #[inline(always)]
    pub const fn rtc_gpio_status_w1ts(&self) -> &RTC_GPIO_STATUS_W1TS {
        &self.rtc_gpio_status_w1ts
    }
    #[doc = "0x20 - One clear RTC GPIO 0 ~ 21 interrupt status"]
    #[inline(always)]
    pub const fn rtc_gpio_status_w1tc(&self) -> &RTC_GPIO_STATUS_W1TC {
        &self.rtc_gpio_status_w1tc
    }
    #[doc = "0x24 - RTC GPIO input data"]
    #[inline(always)]
    pub const fn rtc_gpio_in(&self) -> &RTC_GPIO_IN {
        &self.rtc_gpio_in
    }
    #[doc = "0x28..0x80 - configure RTC GPIO%s"]
    #[inline(always)]
    pub const fn pin(&self, n: usize) -> &PIN {
        &self.pin[n]
    }
    #[doc = "Iterator for array of:"]
    #[doc = "0x28..0x80 - configure RTC GPIO%s"]
    #[inline(always)]
    pub fn pin_iter(&self) -> impl Iterator<Item = &PIN> {
        self.pin.iter()
    }
    #[doc = "0x80 - configure rtc debug"]
    #[inline(always)]
    pub const fn rtc_debug_sel(&self) -> &RTC_DEBUG_SEL {
        &self.rtc_debug_sel
    }
    #[doc = "0x84..0xc0 - configure RTC PAD%s"]
    #[inline(always)]
    pub const fn touch_pad(&self, n: usize) -> &TOUCH_PAD {
        &self.touch_pad[n]
    }
    #[doc = "Iterator for array of:"]
    #[doc = "0x84..0xc0 - configure RTC PAD%s"]
    #[inline(always)]
    pub fn touch_pad_iter(&self) -> impl Iterator<Item = &TOUCH_PAD> {
        self.touch_pad.iter()
    }
    #[doc = "0xc0 - configure RTC PAD15"]
    #[inline(always)]
    pub const fn xtal_32p_pad(&self) -> &XTAL_32P_PAD {
        &self.xtal_32p_pad
    }
    #[doc = "0xc4 - configure RTC PAD16"]
    #[inline(always)]
    pub const fn xtal_32n_pad(&self) -> &XTAL_32N_PAD {
        &self.xtal_32n_pad
    }
    #[doc = "0xc8 - configure RTC PAD17"]
    #[inline(always)]
    pub const fn pad_dac1(&self) -> &PAD_DAC1 {
        &self.pad_dac1
    }
    #[doc = "0xcc - configure RTC PAD18"]
    #[inline(always)]
    pub const fn pad_dac2(&self) -> &PAD_DAC2 {
        &self.pad_dac2
    }
    #[doc = "0xd0 - configure RTC PAD19"]
    #[inline(always)]
    pub const fn rtc_pad19(&self) -> &RTC_PAD19 {
        &self.rtc_pad19
    }
    #[doc = "0xd4 - configure RTC PAD20"]
    #[inline(always)]
    pub const fn rtc_pad20(&self) -> &RTC_PAD20 {
        &self.rtc_pad20
    }
    #[doc = "0xd8 - configure RTC PAD21"]
    #[inline(always)]
    pub const fn rtc_pad21(&self) -> &RTC_PAD21 {
        &self.rtc_pad21
    }
    #[doc = "0xdc - configure EXT0 wakeup"]
    #[inline(always)]
    pub const fn ext_wakeup0(&self) -> &EXT_WAKEUP0 {
        &self.ext_wakeup0
    }
    #[doc = "0xe0 - configure gpio pd XTAL"]
    #[inline(always)]
    pub const fn xtl_ext_ctr(&self) -> &XTL_EXT_CTR {
        &self.xtl_ext_ctr
    }
    #[doc = "0xe4 - configure rtc i2c mux"]
    #[inline(always)]
    pub const fn sar_i2c_io(&self) -> &SAR_I2C_IO {
        &self.sar_i2c_io
    }
    #[doc = "0xe8 - configure touch pad bufmode"]
    #[inline(always)]
    pub const fn touch_ctrl(&self) -> &TOUCH_CTRL {
        &self.touch_ctrl
    }
    #[doc = "0x1fc - version"]
    #[inline(always)]
    pub const fn date(&self) -> &DATE {
        &self.date
    }
}
#[doc = "RTC_GPIO_OUT (rw) register accessor: RTC GPIO 0 ~ 21 output data register\n\nYou can [`read`](crate::Reg::read) this register and get [`rtc_gpio_out::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`rtc_gpio_out::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rtc_gpio_out`] module"]
pub type RTC_GPIO_OUT = crate::Reg<rtc_gpio_out::RTC_GPIO_OUT_SPEC>;
#[doc = "RTC GPIO 0 ~ 21 output data register"]
pub mod rtc_gpio_out;
#[doc = "RTC_GPIO_OUT_W1TS (w) register accessor: one set RTC GPIO output data\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`rtc_gpio_out_w1ts::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rtc_gpio_out_w1ts`] module"]
pub type RTC_GPIO_OUT_W1TS = crate::Reg<rtc_gpio_out_w1ts::RTC_GPIO_OUT_W1TS_SPEC>;
#[doc = "one set RTC GPIO output data"]
pub mod rtc_gpio_out_w1ts;
#[doc = "RTC_GPIO_OUT_W1TC (w) register accessor: one clear RTC GPIO output data\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`rtc_gpio_out_w1tc::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rtc_gpio_out_w1tc`] module"]
pub type RTC_GPIO_OUT_W1TC = crate::Reg<rtc_gpio_out_w1tc::RTC_GPIO_OUT_W1TC_SPEC>;
#[doc = "one clear RTC GPIO output data"]
pub mod rtc_gpio_out_w1tc;
#[doc = "RTC_GPIO_ENABLE (rw) register accessor: Configure RTC GPIO output enable\n\nYou can [`read`](crate::Reg::read) this register and get [`rtc_gpio_enable::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`rtc_gpio_enable::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rtc_gpio_enable`] module"]
pub type RTC_GPIO_ENABLE = crate::Reg<rtc_gpio_enable::RTC_GPIO_ENABLE_SPEC>;
#[doc = "Configure RTC GPIO output enable"]
pub mod rtc_gpio_enable;
#[doc = "RTC_GPIO_ENABLE_W1TS (w) register accessor: one set RTC GPIO output enable\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`rtc_gpio_enable_w1ts::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rtc_gpio_enable_w1ts`] module"]
pub type RTC_GPIO_ENABLE_W1TS = crate::Reg<rtc_gpio_enable_w1ts::RTC_GPIO_ENABLE_W1TS_SPEC>;
#[doc = "one set RTC GPIO output enable"]
pub mod rtc_gpio_enable_w1ts;
#[doc = "ENABLE_W1TC (w) register accessor: one clear RTC GPIO output enable\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`enable_w1tc::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@enable_w1tc`] module"]
pub type ENABLE_W1TC = crate::Reg<enable_w1tc::ENABLE_W1TC_SPEC>;
#[doc = "one clear RTC GPIO output enable"]
pub mod enable_w1tc;
#[doc = "RTC_GPIO_STATUS (rw) register accessor: RTC GPIO 0 ~ 21 interrupt status\n\nYou can [`read`](crate::Reg::read) this register and get [`rtc_gpio_status::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`rtc_gpio_status::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rtc_gpio_status`] module"]
pub type RTC_GPIO_STATUS = crate::Reg<rtc_gpio_status::RTC_GPIO_STATUS_SPEC>;
#[doc = "RTC GPIO 0 ~ 21 interrupt status"]
pub mod rtc_gpio_status;
#[doc = "RTC_GPIO_STATUS_W1TS (w) register accessor: One set RTC GPIO 0 ~ 21 interrupt status\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`rtc_gpio_status_w1ts::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rtc_gpio_status_w1ts`] module"]
pub type RTC_GPIO_STATUS_W1TS = crate::Reg<rtc_gpio_status_w1ts::RTC_GPIO_STATUS_W1TS_SPEC>;
#[doc = "One set RTC GPIO 0 ~ 21 interrupt status"]
pub mod rtc_gpio_status_w1ts;
#[doc = "RTC_GPIO_STATUS_W1TC (w) register accessor: One clear RTC GPIO 0 ~ 21 interrupt status\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`rtc_gpio_status_w1tc::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rtc_gpio_status_w1tc`] module"]
pub type RTC_GPIO_STATUS_W1TC = crate::Reg<rtc_gpio_status_w1tc::RTC_GPIO_STATUS_W1TC_SPEC>;
#[doc = "One clear RTC GPIO 0 ~ 21 interrupt status"]
pub mod rtc_gpio_status_w1tc;
#[doc = "RTC_GPIO_IN (r) register accessor: RTC GPIO input data\n\nYou can [`read`](crate::Reg::read) this register and get [`rtc_gpio_in::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rtc_gpio_in`] module"]
pub type RTC_GPIO_IN = crate::Reg<rtc_gpio_in::RTC_GPIO_IN_SPEC>;
#[doc = "RTC GPIO input data"]
pub mod rtc_gpio_in;
#[doc = "PIN (rw) register accessor: configure RTC GPIO%s\n\nYou can [`read`](crate::Reg::read) this register and get [`pin::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`pin::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@pin`] module"]
pub type PIN = crate::Reg<pin::PIN_SPEC>;
#[doc = "configure RTC GPIO%s"]
pub mod pin;
#[doc = "RTC_DEBUG_SEL (rw) register accessor: configure rtc debug\n\nYou can [`read`](crate::Reg::read) this register and get [`rtc_debug_sel::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`rtc_debug_sel::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rtc_debug_sel`] module"]
pub type RTC_DEBUG_SEL = crate::Reg<rtc_debug_sel::RTC_DEBUG_SEL_SPEC>;
#[doc = "configure rtc debug"]
pub mod rtc_debug_sel;
#[doc = "TOUCH_PAD (rw) register accessor: configure RTC PAD%s\n\nYou can [`read`](crate::Reg::read) this register and get [`touch_pad::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`touch_pad::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@touch_pad`] module"]
pub type TOUCH_PAD = crate::Reg<touch_pad::TOUCH_PAD_SPEC>;
#[doc = "configure RTC PAD%s"]
pub mod touch_pad;
#[doc = "XTAL_32P_PAD (rw) register accessor: configure RTC PAD15\n\nYou can [`read`](crate::Reg::read) this register and get [`xtal_32p_pad::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`xtal_32p_pad::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@xtal_32p_pad`] module"]
pub type XTAL_32P_PAD = crate::Reg<xtal_32p_pad::XTAL_32P_PAD_SPEC>;
#[doc = "configure RTC PAD15"]
pub mod xtal_32p_pad;
#[doc = "XTAL_32N_PAD (rw) register accessor: configure RTC PAD16\n\nYou can [`read`](crate::Reg::read) this register and get [`xtal_32n_pad::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`xtal_32n_pad::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@xtal_32n_pad`] module"]
pub type XTAL_32N_PAD = crate::Reg<xtal_32n_pad::XTAL_32N_PAD_SPEC>;
#[doc = "configure RTC PAD16"]
pub mod xtal_32n_pad;
#[doc = "PAD_DAC1 (rw) register accessor: configure RTC PAD17\n\nYou can [`read`](crate::Reg::read) this register and get [`pad_dac1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`pad_dac1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@pad_dac1`] module"]
pub type PAD_DAC1 = crate::Reg<pad_dac1::PAD_DAC1_SPEC>;
#[doc = "configure RTC PAD17"]
pub mod pad_dac1;
#[doc = "PAD_DAC2 (rw) register accessor: configure RTC PAD18\n\nYou can [`read`](crate::Reg::read) this register and get [`pad_dac2::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`pad_dac2::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@pad_dac2`] module"]
pub type PAD_DAC2 = crate::Reg<pad_dac2::PAD_DAC2_SPEC>;
#[doc = "configure RTC PAD18"]
pub mod pad_dac2;
#[doc = "RTC_PAD19 (rw) register accessor: configure RTC PAD19\n\nYou can [`read`](crate::Reg::read) this register and get [`rtc_pad19::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`rtc_pad19::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rtc_pad19`] module"]
pub type RTC_PAD19 = crate::Reg<rtc_pad19::RTC_PAD19_SPEC>;
#[doc = "configure RTC PAD19"]
pub mod rtc_pad19;
#[doc = "RTC_PAD20 (rw) register accessor: configure RTC PAD20\n\nYou can [`read`](crate::Reg::read) this register and get [`rtc_pad20::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`rtc_pad20::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rtc_pad20`] module"]
pub type RTC_PAD20 = crate::Reg<rtc_pad20::RTC_PAD20_SPEC>;
#[doc = "configure RTC PAD20"]
pub mod rtc_pad20;
#[doc = "RTC_PAD21 (rw) register accessor: configure RTC PAD21\n\nYou can [`read`](crate::Reg::read) this register and get [`rtc_pad21::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`rtc_pad21::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rtc_pad21`] module"]
pub type RTC_PAD21 = crate::Reg<rtc_pad21::RTC_PAD21_SPEC>;
#[doc = "configure RTC PAD21"]
pub mod rtc_pad21;
#[doc = "EXT_WAKEUP0 (rw) register accessor: configure EXT0 wakeup\n\nYou can [`read`](crate::Reg::read) this register and get [`ext_wakeup0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ext_wakeup0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ext_wakeup0`] module"]
pub type EXT_WAKEUP0 = crate::Reg<ext_wakeup0::EXT_WAKEUP0_SPEC>;
#[doc = "configure EXT0 wakeup"]
pub mod ext_wakeup0;
#[doc = "XTL_EXT_CTR (rw) register accessor: configure gpio pd XTAL\n\nYou can [`read`](crate::Reg::read) this register and get [`xtl_ext_ctr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`xtl_ext_ctr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@xtl_ext_ctr`] module"]
pub type XTL_EXT_CTR = crate::Reg<xtl_ext_ctr::XTL_EXT_CTR_SPEC>;
#[doc = "configure gpio pd XTAL"]
pub mod xtl_ext_ctr;
#[doc = "SAR_I2C_IO (rw) register accessor: configure rtc i2c mux\n\nYou can [`read`](crate::Reg::read) this register and get [`sar_i2c_io::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`sar_i2c_io::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@sar_i2c_io`] module"]
pub type SAR_I2C_IO = crate::Reg<sar_i2c_io::SAR_I2C_IO_SPEC>;
#[doc = "configure rtc i2c mux"]
pub mod sar_i2c_io;
#[doc = "TOUCH_CTRL (rw) register accessor: configure touch pad bufmode\n\nYou can [`read`](crate::Reg::read) this register and get [`touch_ctrl::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`touch_ctrl::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@touch_ctrl`] module"]
pub type TOUCH_CTRL = crate::Reg<touch_ctrl::TOUCH_CTRL_SPEC>;
#[doc = "configure touch pad bufmode"]
pub mod touch_ctrl;
#[doc = "DATE (rw) register accessor: version\n\nYou can [`read`](crate::Reg::read) this register and get [`date::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`date::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@date`] module"]
pub type DATE = crate::Reg<date::DATE_SPEC>;
#[doc = "version"]
pub mod date;