#[doc = r"Register block"]
#[repr(C)]
pub struct RegisterBlock {
    _reserved0: [u8; 0x04],
    #[doc = "0x04 - Stops PWM pulse generation on all channels at the end of current PWM period, and stops sequence playback"]
    pub tasks_stop: TASKS_STOP,
    #[doc = "0x08..0x10 - Description collection: Loads the first PWM value on all enabled channels from sequence n, and starts playing that sequence at the rate defined in SEQ\\[n\\]REFRESH and/or DECODER.MODE. Causes PWM generation to start if not running."]
    pub tasks_seqstart: [TASKS_SEQSTART; 2],
    #[doc = "0x10 - Steps by one value in the current sequence on all enabled channels if DECODER.MODE=NextStep. Does not cause PWM generation to start if not running."]
    pub tasks_nextstep: TASKS_NEXTSTEP,
    _reserved3: [u8; 0x70],
    #[doc = "0x84 - Subscribe configuration for task STOP"]
    pub subscribe_stop: SUBSCRIBE_STOP,
    #[doc = "0x88..0x90 - Description collection: Subscribe configuration for task SEQSTART\\[n\\]"]
    pub subscribe_seqstart: [SUBSCRIBE_SEQSTART; 2],
    #[doc = "0x90 - Subscribe configuration for task NEXTSTEP"]
    pub subscribe_nextstep: SUBSCRIBE_NEXTSTEP,
    _reserved6: [u8; 0x70],
    #[doc = "0x104 - Response to STOP task, emitted when PWM pulses are no longer generated"]
    pub events_stopped: EVENTS_STOPPED,
    #[doc = "0x108..0x110 - Description collection: First PWM period started on sequence n"]
    pub events_seqstarted: [EVENTS_SEQSTARTED; 2],
    #[doc = "0x110..0x118 - Description collection: Emitted at end of every sequence n, when last value from RAM has been applied to wave counter"]
    pub events_seqend: [EVENTS_SEQEND; 2],
    #[doc = "0x118 - Emitted at the end of each PWM period"]
    pub events_pwmperiodend: EVENTS_PWMPERIODEND,
    #[doc = "0x11c - Concatenated sequences have been played the amount of times defined in LOOP.CNT"]
    pub events_loopsdone: EVENTS_LOOPSDONE,
    _reserved11: [u8; 0x64],
    #[doc = "0x184 - Publish configuration for event STOPPED"]
    pub publish_stopped: PUBLISH_STOPPED,
    #[doc = "0x188..0x190 - Description collection: Publish configuration for event SEQSTARTED\\[n\\]"]
    pub publish_seqstarted: [PUBLISH_SEQSTARTED; 2],
    #[doc = "0x190..0x198 - Description collection: Publish configuration for event SEQEND\\[n\\]"]
    pub publish_seqend: [PUBLISH_SEQEND; 2],
    #[doc = "0x198 - Publish configuration for event PWMPERIODEND"]
    pub publish_pwmperiodend: PUBLISH_PWMPERIODEND,
    #[doc = "0x19c - Publish configuration for event LOOPSDONE"]
    pub publish_loopsdone: PUBLISH_LOOPSDONE,
    _reserved16: [u8; 0x60],
    #[doc = "0x200 - Shortcuts between local events and tasks"]
    pub shorts: SHORTS,
    _reserved17: [u8; 0xfc],
    #[doc = "0x300 - Enable or disable interrupt"]
    pub inten: INTEN,
    #[doc = "0x304 - Enable interrupt"]
    pub intenset: INTENSET,
    #[doc = "0x308 - Disable interrupt"]
    pub intenclr: INTENCLR,
    _reserved20: [u8; 0x01f4],
    #[doc = "0x500 - PWM module enable register"]
    pub enable: ENABLE,
    #[doc = "0x504 - Selects operating mode of the wave counter"]
    pub mode: MODE,
    #[doc = "0x508 - Value up to which the pulse generator counter counts"]
    pub countertop: COUNTERTOP,
    #[doc = "0x50c - Configuration for PWM_CLK"]
    pub prescaler: PRESCALER,
    #[doc = "0x510 - Configuration of the decoder"]
    pub decoder: DECODER,
    #[doc = "0x514 - Number of playbacks of a loop"]
    pub loop_: LOOP,
    _reserved26: [u8; 0x08],
    #[doc = "0x520..0x530 - Unspecified"]
    pub seq0: SEQ,
    _reserved27: [u8; 0x10],
    #[doc = "0x540..0x550 - Unspecified"]
    pub seq1: SEQ,
    _reserved28: [u8; 0x10],
    #[doc = "0x560..0x570 - Unspecified"]
    pub psel: PSEL,
}
#[doc = "TASKS_STOP (w) register accessor: an alias for `Reg<TASKS_STOP_SPEC>`"]
pub type TASKS_STOP = crate::Reg<tasks_stop::TASKS_STOP_SPEC>;
#[doc = "Stops PWM pulse generation on all channels at the end of current PWM period, and stops sequence playback"]
pub mod tasks_stop;
#[doc = "TASKS_SEQSTART (w) register accessor: an alias for `Reg<TASKS_SEQSTART_SPEC>`"]
pub type TASKS_SEQSTART = crate::Reg<tasks_seqstart::TASKS_SEQSTART_SPEC>;
#[doc = "Description collection: Loads the first PWM value on all enabled channels from sequence n, and starts playing that sequence at the rate defined in SEQ\\[n\\]REFRESH and/or DECODER.MODE. Causes PWM generation to start if not running."]
pub mod tasks_seqstart;
#[doc = "TASKS_NEXTSTEP (w) register accessor: an alias for `Reg<TASKS_NEXTSTEP_SPEC>`"]
pub type TASKS_NEXTSTEP = crate::Reg<tasks_nextstep::TASKS_NEXTSTEP_SPEC>;
#[doc = "Steps by one value in the current sequence on all enabled channels if DECODER.MODE=NextStep. Does not cause PWM generation to start if not running."]
pub mod tasks_nextstep;
#[doc = "SUBSCRIBE_STOP (rw) register accessor: an alias for `Reg<SUBSCRIBE_STOP_SPEC>`"]
pub type SUBSCRIBE_STOP = crate::Reg<subscribe_stop::SUBSCRIBE_STOP_SPEC>;
#[doc = "Subscribe configuration for task STOP"]
pub mod subscribe_stop;
#[doc = "SUBSCRIBE_SEQSTART (rw) register accessor: an alias for `Reg<SUBSCRIBE_SEQSTART_SPEC>`"]
pub type SUBSCRIBE_SEQSTART = crate::Reg<subscribe_seqstart::SUBSCRIBE_SEQSTART_SPEC>;
#[doc = "Description collection: Subscribe configuration for task SEQSTART\\[n\\]"]
pub mod subscribe_seqstart;
#[doc = "SUBSCRIBE_NEXTSTEP (rw) register accessor: an alias for `Reg<SUBSCRIBE_NEXTSTEP_SPEC>`"]
pub type SUBSCRIBE_NEXTSTEP = crate::Reg<subscribe_nextstep::SUBSCRIBE_NEXTSTEP_SPEC>;
#[doc = "Subscribe configuration for task NEXTSTEP"]
pub mod subscribe_nextstep;
#[doc = "EVENTS_STOPPED (rw) register accessor: an alias for `Reg<EVENTS_STOPPED_SPEC>`"]
pub type EVENTS_STOPPED = crate::Reg<events_stopped::EVENTS_STOPPED_SPEC>;
#[doc = "Response to STOP task, emitted when PWM pulses are no longer generated"]
pub mod events_stopped;
#[doc = "EVENTS_SEQSTARTED (rw) register accessor: an alias for `Reg<EVENTS_SEQSTARTED_SPEC>`"]
pub type EVENTS_SEQSTARTED = crate::Reg<events_seqstarted::EVENTS_SEQSTARTED_SPEC>;
#[doc = "Description collection: First PWM period started on sequence n"]
pub mod events_seqstarted;
#[doc = "EVENTS_SEQEND (rw) register accessor: an alias for `Reg<EVENTS_SEQEND_SPEC>`"]
pub type EVENTS_SEQEND = crate::Reg<events_seqend::EVENTS_SEQEND_SPEC>;
#[doc = "Description collection: Emitted at end of every sequence n, when last value from RAM has been applied to wave counter"]
pub mod events_seqend;
#[doc = "EVENTS_PWMPERIODEND (rw) register accessor: an alias for `Reg<EVENTS_PWMPERIODEND_SPEC>`"]
pub type EVENTS_PWMPERIODEND = crate::Reg<events_pwmperiodend::EVENTS_PWMPERIODEND_SPEC>;
#[doc = "Emitted at the end of each PWM period"]
pub mod events_pwmperiodend;
#[doc = "EVENTS_LOOPSDONE (rw) register accessor: an alias for `Reg<EVENTS_LOOPSDONE_SPEC>`"]
pub type EVENTS_LOOPSDONE = crate::Reg<events_loopsdone::EVENTS_LOOPSDONE_SPEC>;
#[doc = "Concatenated sequences have been played the amount of times defined in LOOP.CNT"]
pub mod events_loopsdone;
#[doc = "PUBLISH_STOPPED (rw) register accessor: an alias for `Reg<PUBLISH_STOPPED_SPEC>`"]
pub type PUBLISH_STOPPED = crate::Reg<publish_stopped::PUBLISH_STOPPED_SPEC>;
#[doc = "Publish configuration for event STOPPED"]
pub mod publish_stopped;
#[doc = "PUBLISH_SEQSTARTED (rw) register accessor: an alias for `Reg<PUBLISH_SEQSTARTED_SPEC>`"]
pub type PUBLISH_SEQSTARTED = crate::Reg<publish_seqstarted::PUBLISH_SEQSTARTED_SPEC>;
#[doc = "Description collection: Publish configuration for event SEQSTARTED\\[n\\]"]
pub mod publish_seqstarted;
#[doc = "PUBLISH_SEQEND (rw) register accessor: an alias for `Reg<PUBLISH_SEQEND_SPEC>`"]
pub type PUBLISH_SEQEND = crate::Reg<publish_seqend::PUBLISH_SEQEND_SPEC>;
#[doc = "Description collection: Publish configuration for event SEQEND\\[n\\]"]
pub mod publish_seqend;
#[doc = "PUBLISH_PWMPERIODEND (rw) register accessor: an alias for `Reg<PUBLISH_PWMPERIODEND_SPEC>`"]
pub type PUBLISH_PWMPERIODEND = crate::Reg<publish_pwmperiodend::PUBLISH_PWMPERIODEND_SPEC>;
#[doc = "Publish configuration for event PWMPERIODEND"]
pub mod publish_pwmperiodend;
#[doc = "PUBLISH_LOOPSDONE (rw) register accessor: an alias for `Reg<PUBLISH_LOOPSDONE_SPEC>`"]
pub type PUBLISH_LOOPSDONE = crate::Reg<publish_loopsdone::PUBLISH_LOOPSDONE_SPEC>;
#[doc = "Publish configuration for event LOOPSDONE"]
pub mod publish_loopsdone;
#[doc = "SHORTS (rw) register accessor: an alias for `Reg<SHORTS_SPEC>`"]
pub type SHORTS = crate::Reg<shorts::SHORTS_SPEC>;
#[doc = "Shortcuts between local events and tasks"]
pub mod shorts;
#[doc = "INTEN (rw) register accessor: an alias for `Reg<INTEN_SPEC>`"]
pub type INTEN = crate::Reg<inten::INTEN_SPEC>;
#[doc = "Enable or disable interrupt"]
pub mod inten;
#[doc = "INTENSET (rw) register accessor: an alias for `Reg<INTENSET_SPEC>`"]
pub type INTENSET = crate::Reg<intenset::INTENSET_SPEC>;
#[doc = "Enable interrupt"]
pub mod intenset;
#[doc = "INTENCLR (rw) register accessor: an alias for `Reg<INTENCLR_SPEC>`"]
pub type INTENCLR = crate::Reg<intenclr::INTENCLR_SPEC>;
#[doc = "Disable interrupt"]
pub mod intenclr;
#[doc = "ENABLE (rw) register accessor: an alias for `Reg<ENABLE_SPEC>`"]
pub type ENABLE = crate::Reg<enable::ENABLE_SPEC>;
#[doc = "PWM module enable register"]
pub mod enable;
#[doc = "MODE (rw) register accessor: an alias for `Reg<MODE_SPEC>`"]
pub type MODE = crate::Reg<mode::MODE_SPEC>;
#[doc = "Selects operating mode of the wave counter"]
pub mod mode;
#[doc = "COUNTERTOP (rw) register accessor: an alias for `Reg<COUNTERTOP_SPEC>`"]
pub type COUNTERTOP = crate::Reg<countertop::COUNTERTOP_SPEC>;
#[doc = "Value up to which the pulse generator counter counts"]
pub mod countertop;
#[doc = "PRESCALER (rw) register accessor: an alias for `Reg<PRESCALER_SPEC>`"]
pub type PRESCALER = crate::Reg<prescaler::PRESCALER_SPEC>;
#[doc = "Configuration for PWM_CLK"]
pub mod prescaler;
#[doc = "DECODER (rw) register accessor: an alias for `Reg<DECODER_SPEC>`"]
pub type DECODER = crate::Reg<decoder::DECODER_SPEC>;
#[doc = "Configuration of the decoder"]
pub mod decoder;
#[doc = "LOOP (rw) register accessor: an alias for `Reg<LOOP_SPEC>`"]
pub type LOOP = crate::Reg<loop_::LOOP_SPEC>;
#[doc = "Number of playbacks of a loop"]
pub mod loop_;
#[doc = "Unspecified"]
pub use seq::SEQ;
#[doc = r"Cluster"]
#[doc = "Unspecified"]
pub mod seq;
#[doc = "Unspecified"]
pub use psel::PSEL;
#[doc = r"Cluster"]
#[doc = "Unspecified"]
pub mod psel;