swaitsandClaude Opus 4.6
3102fc747a
Implement full SSD1306 OLED display support: - Splash screen on boot (1.5s) with project name, version, board - Dashboard showing radio state, config, counters, RSSI/SNR - RSSI history sparkline (64-sample ring buffer, 2px-wide bars) - DisplayOn/DisplayOff host commands routed via dedicated channel - Pure render functions against generic DrawTarget (no hardware coupling) - Display on/off control bypasses radio task entirely Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
83 lines
2.9 KiB
Makefile
83 lines
2.9 KiB
Makefile
set shell := ["bash", "-c"]
|
|
|
|
# Board definitions: feature target chip
|
|
# Xtensa targets require the esp toolchain (espup); check-all gracefully skips
|
|
# boards whose toolchain isn't installed.
|
|
heltec_v3 := "heltec_v3 xtensa-esp32s3-none-elf esp32s3"
|
|
rak_4631 := "rak_4631 thumbv7em-none-eabihf nRF52840_xxAA"
|
|
|
|
firmware_dir := "firmware"
|
|
|
|
# All known boards
|
|
boards := "heltec_v3 rak_4631"
|
|
|
|
# Check all boards that can build with the available toolchain
|
|
check-all:
|
|
@for board in {{boards}}; do \
|
|
if just _can_build $board 2>/dev/null; then \
|
|
echo "── checking $board ──"; \
|
|
just check $board; \
|
|
else \
|
|
echo "── skipping $board (toolchain not available) ──"; \
|
|
fi; \
|
|
done
|
|
|
|
# Check a single board compiles
|
|
check board:
|
|
@just _cargo {{board}} check
|
|
|
|
# Run clippy on a single board
|
|
clippy board:
|
|
@read -r feat target chip <<< "$(just _info {{board}})"; \
|
|
tc=""; \
|
|
case "$target" in xtensa-*) tc="+esp" ;; esac; \
|
|
cargo $tc clippy --target $target --features $feat -- -D warnings
|
|
|
|
# Build release firmware and copy to firmware/ with a readable name
|
|
build board profile="release":
|
|
@just _cargo {{board}} "build --{{profile}}"
|
|
@just _copy_firmware {{board}} {{profile}}
|
|
|
|
# Build and flash a board via probe-rs
|
|
flash board:
|
|
@just build {{board}} release
|
|
@read -r feat target chip <<< "$(just _info {{board}})"; \
|
|
probe-rs run --chip $chip "{{firmware_dir}}/lora-dongle-{{board}}-release.elf"
|
|
|
|
# Show binary size for a release build
|
|
size board:
|
|
@just _cargo {{board}} "size --release"
|
|
|
|
# ── Private helpers ───────────────────────────────────────────────────
|
|
|
|
# Run a cargo command for a board, using +esp toolchain for Xtensa targets
|
|
[private]
|
|
_cargo board cmd:
|
|
@read -r feat target chip <<< "$(just _info {{board}})"; \
|
|
tc=""; \
|
|
case "$target" in xtensa-*) tc="+esp" ;; esac; \
|
|
cargo $tc {{cmd}} --target $target --features $feat
|
|
|
|
# Check if a board's toolchain is available
|
|
[private]
|
|
_can_build board:
|
|
@read -r feat target chip <<< "$(just _info {{board}})"; \
|
|
case "$target" in \
|
|
xtensa-*) rustup toolchain list | grep -q "^esp" ;; \
|
|
*) rustup target list --installed | grep -q "^$target$" || rustup target add "$target" >/dev/null 2>&1 ;; \
|
|
esac
|
|
|
|
[private]
|
|
_copy_firmware board profile:
|
|
@mkdir -p {{firmware_dir}}
|
|
@read -r feat target chip <<< "$(just _info {{board}})"; \
|
|
src="target/$target/{{profile}}/lora-dongle"; \
|
|
dst="{{firmware_dir}}/lora-dongle-{{board}}-{{profile}}"; \
|
|
if [ -f "$src" ]; then cp "$src" "$dst.elf"; echo "→ $dst.elf"; fi
|
|
|
|
[private]
|
|
_info name:
|
|
@if [ "{{name}}" == "heltec_v3" ]; then echo "{{heltec_v3}}"; \
|
|
elif [ "{{name}}" == "rak_4631" ]; then echo "{{rak_4631}}"; \
|
|
else echo "Unknown board: {{name}}" >&2; exit 1; fi
|