swaitsandClaude Opus 4.6
3102fc747a
Implement full SSD1306 OLED display support: - Splash screen on boot (1.5s) with project name, version, board - Dashboard showing radio state, config, counters, RSSI/SNR - RSSI history sparkline (64-sample ring buffer, 2px-wide bars) - DisplayOn/DisplayOff host commands routed via dedicated channel - Pure render functions against generic DrawTarget (no hardware coupling) - Display on/off control bypasses radio task entirely Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
35 lines
1.5 KiB
TOML
35 lines
1.5 KiB
TOML
[target.thumbv6m-none-eabi]
|
|
runner = "qemu-system-arm -cpu cortex-m0 -machine lm3s6965evb -nographic -semihosting-config enable=on,target=native -kernel"
|
|
|
|
[target.thumbv7m-none-eabi]
|
|
runner = "qemu-system-arm -cpu cortex-m3 -machine lm3s6965evb -nographic -semihosting-config enable=on,target=native -kernel"
|
|
|
|
[target.thumbv7em-none-eabi]
|
|
runner = "qemu-system-arm -cpu cortex-m4 -machine lm3s6965evb -nographic -semihosting-config enable=on,target=native -kernel"
|
|
|
|
[target.thumbv7em-none-eabihf]
|
|
runner = "qemu-system-arm -cpu cortex-m4 -machine lm3s6965evb -nographic -semihosting-config enable=on,target=native -kernel"
|
|
|
|
[target.'cfg(all(target_arch = "arm", target_os = "none"))']
|
|
# uncomment ONE of these three option to make `cargo run` start a GDB session
|
|
# which option to pick depends on your system
|
|
# runner = "arm-none-eabi-gdb -q -x openocd.gdb"
|
|
# runner = "gdb-multiarch -q -x openocd.gdb"
|
|
# runner = "gdb -q -x openocd.gdb"
|
|
|
|
rustflags = [
|
|
# LLD (shipped with the Rust toolchain) is used as the default linker
|
|
"-C", "link-arg=-Tlink.x",
|
|
|
|
# if you run into problems with LLD switch to the GNU linker by commenting out
|
|
# this line
|
|
# "-C", "linker=arm-none-eabi-ld",
|
|
|
|
# if you need to link to pre-compiled C libraries provided by a C toolchain
|
|
# use GCC as the linker by commenting out both lines above and then
|
|
# uncommenting the three lines below
|
|
# "-C", "linker=arm-none-eabi-gcc",
|
|
# "-C", "link-arg=-Wl,-Tlink.x",
|
|
# "-C", "link-arg=-nostartfiles",
|
|
]
|