swaitsandClaude Opus 4.6
3102fc747a
Implement full SSD1306 OLED display support: - Splash screen on boot (1.5s) with project name, version, board - Dashboard showing radio state, config, counters, RSSI/SNR - RSSI history sparkline (64-sample ring buffer, 2px-wide bars) - DisplayOn/DisplayOff host commands routed via dedicated channel - Pure render functions against generic DrawTarget (no hardware coupling) - Display on/off control bypasses radio task entirely Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
89 lines
2.3 KiB
Rust
89 lines
2.3 KiB
Rust
//! Print "Hello world!" with "Hello rust!" underneath. Uses the `embedded_graphics` crate to draw
|
|
//! the text with a 6x10 pixel font.
|
|
//!
|
|
//! This example is for the STM32F103 "Blue Pill" board using I2C1.
|
|
//!
|
|
//! Wiring connections are as follows for a CRIUS-branded display:
|
|
//!
|
|
//! ```
|
|
//! Display -> Blue Pill
|
|
//! (black) GND -> GND
|
|
//! (red) +5V -> VCC
|
|
//! (yellow) SDA -> PB7
|
|
//! (green) SCL -> PB6
|
|
//! ```
|
|
//!
|
|
//! Run on a Blue Pill with `cargo run --example text_i2c`.
|
|
|
|
#![no_std]
|
|
#![no_main]
|
|
|
|
use cortex_m::asm::nop;
|
|
use cortex_m_rt::entry;
|
|
use defmt_rtt as _;
|
|
use embassy_stm32::time::Hertz;
|
|
#[cfg(feature = "async")]
|
|
use embassy_stm32::{bind_interrupts, i2c, peripherals};
|
|
use embedded_graphics::{
|
|
mono_font::{ascii::FONT_6X10, MonoTextStyleBuilder},
|
|
pixelcolor::BinaryColor,
|
|
prelude::*,
|
|
text::{Baseline, Text},
|
|
};
|
|
use panic_probe as _;
|
|
use ssd1306::{prelude::*, I2CDisplayInterface, Ssd1306};
|
|
|
|
#[entry]
|
|
fn main() -> ! {
|
|
let p = embassy_stm32::init(Default::default());
|
|
#[cfg(feature = "async")]
|
|
bind_interrupts!(struct Irqs {
|
|
I2C1_EV => i2c::EventInterruptHandler<peripherals::I2C1>;
|
|
I2C1_ER => i2c::ErrorInterruptHandler<peripherals::I2C1>;
|
|
});
|
|
|
|
#[cfg(feature = "async")]
|
|
let i2c = embassy_stm32::i2c::I2c::new(
|
|
p.I2C1,
|
|
p.PB6,
|
|
p.PB7,
|
|
Irqs,
|
|
p.DMA1_CH6,
|
|
p.DMA1_CH7,
|
|
Hertz::khz(400),
|
|
Default::default(),
|
|
);
|
|
|
|
#[cfg(not(feature = "async"))]
|
|
let i2c = embassy_stm32::i2c::I2c::new_blocking(
|
|
p.I2C1,
|
|
p.PB6,
|
|
p.PB7,
|
|
Hertz::khz(400),
|
|
Default::default(),
|
|
);
|
|
|
|
let interface = I2CDisplayInterface::new(i2c);
|
|
let mut display = Ssd1306::new(interface, DisplaySize128x64, DisplayRotation::Rotate0)
|
|
.into_buffered_graphics_mode();
|
|
display.init().unwrap();
|
|
|
|
let text_style = MonoTextStyleBuilder::new()
|
|
.font(&FONT_6X10)
|
|
.text_color(BinaryColor::On)
|
|
.build();
|
|
|
|
Text::with_baseline("Hello world!", Point::zero(), text_style, Baseline::Top)
|
|
.draw(&mut display)
|
|
.unwrap();
|
|
|
|
Text::with_baseline("Hello Rust!", Point::new(0, 16), text_style, Baseline::Top)
|
|
.draw(&mut display)
|
|
.unwrap();
|
|
|
|
display.flush().unwrap();
|
|
loop {
|
|
nop()
|
|
}
|
|
}
|