swaitsandClaude Opus 4.6
3102fc747a
Implement full SSD1306 OLED display support: - Splash screen on boot (1.5s) with project name, version, board - Dashboard showing radio state, config, counters, RSSI/SNR - RSSI history sparkline (64-sample ring buffer, 2px-wide bars) - DisplayOn/DisplayOff host commands routed via dedicated channel - Pure render functions against generic DrawTarget (no hardware coupling) - Display on/off control bypasses radio task entirely Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
137 lines
7.1 KiB
Rust
137 lines
7.1 KiB
Rust
#[doc = r"Register block"]
|
|
#[repr(C)]
|
|
pub struct RegisterBlock {
|
|
_reserved0: [u8; 0x04],
|
|
#[doc = "0x04 - Stops PWM pulse generation on all channels at the end of current PWM period, and stops sequence playback"]
|
|
pub tasks_stop: TASKS_STOP,
|
|
#[doc = "0x08..0x10 - Description collection: Loads the first PWM value on all enabled channels from sequence n, and starts playing that sequence at the rate defined in SEQ\\[n\\]REFRESH and/or DECODER.MODE. Causes PWM generation to start if not running."]
|
|
pub tasks_seqstart: [TASKS_SEQSTART; 2],
|
|
#[doc = "0x10 - Steps by one value in the current sequence on all enabled channels if DECODER.MODE=NextStep. Does not cause PWM generation to start if not running."]
|
|
pub tasks_nextstep: TASKS_NEXTSTEP,
|
|
_reserved3: [u8; 0xf0],
|
|
#[doc = "0x104 - Response to STOP task, emitted when PWM pulses are no longer generated"]
|
|
pub events_stopped: EVENTS_STOPPED,
|
|
#[doc = "0x108..0x110 - Description collection: First PWM period started on sequence n"]
|
|
pub events_seqstarted: [EVENTS_SEQSTARTED; 2],
|
|
#[doc = "0x110..0x118 - Description collection: Emitted at end of every sequence n, when last value from RAM has been applied to wave counter"]
|
|
pub events_seqend: [EVENTS_SEQEND; 2],
|
|
#[doc = "0x118 - Emitted at the end of each PWM period"]
|
|
pub events_pwmperiodend: EVENTS_PWMPERIODEND,
|
|
#[doc = "0x11c - Concatenated sequences have been played the amount of times defined in LOOP.CNT"]
|
|
pub events_loopsdone: EVENTS_LOOPSDONE,
|
|
_reserved8: [u8; 0xe0],
|
|
#[doc = "0x200 - Shortcuts between local events and tasks"]
|
|
pub shorts: SHORTS,
|
|
_reserved9: [u8; 0xfc],
|
|
#[doc = "0x300 - Enable or disable interrupt"]
|
|
pub inten: INTEN,
|
|
#[doc = "0x304 - Enable interrupt"]
|
|
pub intenset: INTENSET,
|
|
#[doc = "0x308 - Disable interrupt"]
|
|
pub intenclr: INTENCLR,
|
|
_reserved12: [u8; 0x01f4],
|
|
#[doc = "0x500 - PWM module enable register"]
|
|
pub enable: ENABLE,
|
|
#[doc = "0x504 - Selects operating mode of the wave counter"]
|
|
pub mode: MODE,
|
|
#[doc = "0x508 - Value up to which the pulse generator counter counts"]
|
|
pub countertop: COUNTERTOP,
|
|
#[doc = "0x50c - Configuration for PWM_CLK"]
|
|
pub prescaler: PRESCALER,
|
|
#[doc = "0x510 - Configuration of the decoder"]
|
|
pub decoder: DECODER,
|
|
#[doc = "0x514 - Number of playbacks of a loop"]
|
|
pub loop_: LOOP,
|
|
_reserved18: [u8; 0x08],
|
|
#[doc = "0x520..0x530 - Unspecified"]
|
|
pub seq0: SEQ,
|
|
_reserved19: [u8; 0x10],
|
|
#[doc = "0x540..0x550 - Unspecified"]
|
|
pub seq1: SEQ,
|
|
_reserved20: [u8; 0x10],
|
|
#[doc = "0x560..0x570 - Unspecified"]
|
|
pub psel: PSEL,
|
|
}
|
|
#[doc = "TASKS_STOP (w) register accessor: an alias for `Reg<TASKS_STOP_SPEC>`"]
|
|
pub type TASKS_STOP = crate::Reg<tasks_stop::TASKS_STOP_SPEC>;
|
|
#[doc = "Stops PWM pulse generation on all channels at the end of current PWM period, and stops sequence playback"]
|
|
pub mod tasks_stop;
|
|
#[doc = "TASKS_SEQSTART (w) register accessor: an alias for `Reg<TASKS_SEQSTART_SPEC>`"]
|
|
pub type TASKS_SEQSTART = crate::Reg<tasks_seqstart::TASKS_SEQSTART_SPEC>;
|
|
#[doc = "Description collection: Loads the first PWM value on all enabled channels from sequence n, and starts playing that sequence at the rate defined in SEQ\\[n\\]REFRESH and/or DECODER.MODE. Causes PWM generation to start if not running."]
|
|
pub mod tasks_seqstart;
|
|
#[doc = "TASKS_NEXTSTEP (w) register accessor: an alias for `Reg<TASKS_NEXTSTEP_SPEC>`"]
|
|
pub type TASKS_NEXTSTEP = crate::Reg<tasks_nextstep::TASKS_NEXTSTEP_SPEC>;
|
|
#[doc = "Steps by one value in the current sequence on all enabled channels if DECODER.MODE=NextStep. Does not cause PWM generation to start if not running."]
|
|
pub mod tasks_nextstep;
|
|
#[doc = "EVENTS_STOPPED (rw) register accessor: an alias for `Reg<EVENTS_STOPPED_SPEC>`"]
|
|
pub type EVENTS_STOPPED = crate::Reg<events_stopped::EVENTS_STOPPED_SPEC>;
|
|
#[doc = "Response to STOP task, emitted when PWM pulses are no longer generated"]
|
|
pub mod events_stopped;
|
|
#[doc = "EVENTS_SEQSTARTED (rw) register accessor: an alias for `Reg<EVENTS_SEQSTARTED_SPEC>`"]
|
|
pub type EVENTS_SEQSTARTED = crate::Reg<events_seqstarted::EVENTS_SEQSTARTED_SPEC>;
|
|
#[doc = "Description collection: First PWM period started on sequence n"]
|
|
pub mod events_seqstarted;
|
|
#[doc = "EVENTS_SEQEND (rw) register accessor: an alias for `Reg<EVENTS_SEQEND_SPEC>`"]
|
|
pub type EVENTS_SEQEND = crate::Reg<events_seqend::EVENTS_SEQEND_SPEC>;
|
|
#[doc = "Description collection: Emitted at end of every sequence n, when last value from RAM has been applied to wave counter"]
|
|
pub mod events_seqend;
|
|
#[doc = "EVENTS_PWMPERIODEND (rw) register accessor: an alias for `Reg<EVENTS_PWMPERIODEND_SPEC>`"]
|
|
pub type EVENTS_PWMPERIODEND = crate::Reg<events_pwmperiodend::EVENTS_PWMPERIODEND_SPEC>;
|
|
#[doc = "Emitted at the end of each PWM period"]
|
|
pub mod events_pwmperiodend;
|
|
#[doc = "EVENTS_LOOPSDONE (rw) register accessor: an alias for `Reg<EVENTS_LOOPSDONE_SPEC>`"]
|
|
pub type EVENTS_LOOPSDONE = crate::Reg<events_loopsdone::EVENTS_LOOPSDONE_SPEC>;
|
|
#[doc = "Concatenated sequences have been played the amount of times defined in LOOP.CNT"]
|
|
pub mod events_loopsdone;
|
|
#[doc = "SHORTS (rw) register accessor: an alias for `Reg<SHORTS_SPEC>`"]
|
|
pub type SHORTS = crate::Reg<shorts::SHORTS_SPEC>;
|
|
#[doc = "Shortcuts between local events and tasks"]
|
|
pub mod shorts;
|
|
#[doc = "INTEN (rw) register accessor: an alias for `Reg<INTEN_SPEC>`"]
|
|
pub type INTEN = crate::Reg<inten::INTEN_SPEC>;
|
|
#[doc = "Enable or disable interrupt"]
|
|
pub mod inten;
|
|
#[doc = "INTENSET (rw) register accessor: an alias for `Reg<INTENSET_SPEC>`"]
|
|
pub type INTENSET = crate::Reg<intenset::INTENSET_SPEC>;
|
|
#[doc = "Enable interrupt"]
|
|
pub mod intenset;
|
|
#[doc = "INTENCLR (rw) register accessor: an alias for `Reg<INTENCLR_SPEC>`"]
|
|
pub type INTENCLR = crate::Reg<intenclr::INTENCLR_SPEC>;
|
|
#[doc = "Disable interrupt"]
|
|
pub mod intenclr;
|
|
#[doc = "ENABLE (rw) register accessor: an alias for `Reg<ENABLE_SPEC>`"]
|
|
pub type ENABLE = crate::Reg<enable::ENABLE_SPEC>;
|
|
#[doc = "PWM module enable register"]
|
|
pub mod enable;
|
|
#[doc = "MODE (rw) register accessor: an alias for `Reg<MODE_SPEC>`"]
|
|
pub type MODE = crate::Reg<mode::MODE_SPEC>;
|
|
#[doc = "Selects operating mode of the wave counter"]
|
|
pub mod mode;
|
|
#[doc = "COUNTERTOP (rw) register accessor: an alias for `Reg<COUNTERTOP_SPEC>`"]
|
|
pub type COUNTERTOP = crate::Reg<countertop::COUNTERTOP_SPEC>;
|
|
#[doc = "Value up to which the pulse generator counter counts"]
|
|
pub mod countertop;
|
|
#[doc = "PRESCALER (rw) register accessor: an alias for `Reg<PRESCALER_SPEC>`"]
|
|
pub type PRESCALER = crate::Reg<prescaler::PRESCALER_SPEC>;
|
|
#[doc = "Configuration for PWM_CLK"]
|
|
pub mod prescaler;
|
|
#[doc = "DECODER (rw) register accessor: an alias for `Reg<DECODER_SPEC>`"]
|
|
pub type DECODER = crate::Reg<decoder::DECODER_SPEC>;
|
|
#[doc = "Configuration of the decoder"]
|
|
pub mod decoder;
|
|
#[doc = "LOOP (rw) register accessor: an alias for `Reg<LOOP_SPEC>`"]
|
|
pub type LOOP = crate::Reg<loop_::LOOP_SPEC>;
|
|
#[doc = "Number of playbacks of a loop"]
|
|
pub mod loop_;
|
|
#[doc = "Unspecified"]
|
|
pub use seq::SEQ;
|
|
#[doc = r"Cluster"]
|
|
#[doc = "Unspecified"]
|
|
pub mod seq;
|
|
#[doc = "Unspecified"]
|
|
pub use psel::PSEL;
|
|
#[doc = r"Cluster"]
|
|
#[doc = "Unspecified"]
|
|
pub mod psel;
|