meshcore-spec/versions/v0.1.0/14-crypto.md

MeshCore Protocol Specification

Section 14: Cryptography

Overview

MeshCore uses a combination of symmetric and asymmetric cryptography. Data confidentiality is provided by AES-128 in ECB mode with zero padding. Data integrity is provided by HMAC-SHA256 truncated to 2 bytes. These are combined in an encrypt-then-MAC scheme.

Algorithms

Operation	Algorithm	Key Size	Output
Symmetric Encryption	AES-128-ECB	16 bytes	Multiple of 16 bytes
Message Authentication	HMAC-SHA256	32 bytes	2 bytes (truncated)
Digital Signature	Ed25519	32/64 bytes	64 bytes
Key Exchange	X25519 (ECDH)	32 bytes	32 bytes
Hashing	SHA-256	—	Up to 32 bytes

AES-128-ECB Encryption

MeshCore uses AES-128 in Electronic Codebook (ECB) mode with zero-byte padding.

Key: The first 16 bytes (CIPHER_KEY_SIZE) of the shared secret.

Encryption:

1. Set the AES-128 key to shared_secret[0..15].
2. Process the plaintext in 16-byte blocks: a. For each complete 16-byte block, encrypt in place. b. For the final partial block (< 16 bytes):
   • Copy the remaining bytes to a 16-byte buffer.
   • Fill remaining bytes with zeros.
   • Encrypt the padded block.
3. If the plaintext is empty, encrypt a 16-byte all-zero block.
4. The output is always a multiple of 16 bytes.

Decryption:

1. Set the AES-128 key to shared_secret[0..15].
2. Process the ciphertext in 16-byte blocks, decrypting each.
3. The output length equals the ciphertext length.
4. The final block MAY contain trailing zero bytes from padding. The application must know the original plaintext length or use a length-prefixed format to determine where meaningful data ends.

HMAC-SHA256 (Truncated to 2 Bytes)

MeshCore computes HMAC-SHA256 over the ciphertext and truncates the result to CIPHER_MAC_SIZE (2) bytes.

Key: The full 32 bytes (PUB_KEY_SIZE) of the shared secret.

Note: The HMAC key uses the full 32-byte shared secret, while the AES key uses only the first 16 bytes. This is an important distinction.

Computation:

mac = HMAC-SHA256(key=shared_secret[0..31], message=ciphertext)[0..1]

The first 2 bytes of the HMAC-SHA256 output are used as the MAC.

Encrypt-then-MAC

The encrypt-then-MAC scheme combines AES-128-ECB encryption with HMAC-SHA256 authentication:

Encoding (encryptThenMAC):

1. Encrypt the plaintext using AES-128-ECB (see above). Store ciphertext at dest[2..] (offset by MAC size).
2. Compute HMAC-SHA256 over the ciphertext using the full 32-byte shared secret. Truncate to 2 bytes.
3. Store the 2-byte MAC at dest[0..1].
4. Return total length: 2 + ciphertext_length.

Output format:

[MAC (2 bytes)][Ciphertext (N × 16 bytes)]

Decoding (MACThenDecrypt):

1. If input length ≤ 2 (CIPHER_MAC_SIZE), return failure (invalid).
2. Recompute HMAC-SHA256 over src[2..] (the ciphertext portion) using the full 32-byte shared secret. Truncate to 2 bytes.
3. Compare the computed MAC with src[0..1].
4. If MACs do not match, return failure (0 = invalid HMAC).
5. If MACs match, decrypt src[2..] using AES-128-ECB.
6. Return the decrypted plaintext length.

Security Notes

• ECB mode: AES-ECB encrypts each 16-byte block independently. Identical plaintext blocks produce identical ciphertext blocks. This is a known weakness of ECB mode, but MeshCore's short payloads and mesh-network context make this acceptable for its use case.
• 2-byte MAC: The truncated HMAC provides only 16 bits of authentication. This means there is approximately a 1-in-65536 chance of a forged MAC being accepted. This trade-off prioritizes bandwidth over authentication strength.
• Key derivation: The shared secret is used directly as both AES key (first 16 bytes) and HMAC key (full 32 bytes). No key derivation function (KDF) is applied.

Cross-References

• Section 6: Encrypted Payloads — Usage in packet payloads
• Section 15: Identity — Shared secret computation via ECDH
• Test vectors: corpus/crypto/

Reference Implementation

• Utils::encrypt() in src/Utils.cpp — AES-128-ECB encryption
• Utils::decrypt() in src/Utils.cpp — AES-128-ECB decryption
• Utils::encryptThenMAC() in src/Utils.cpp — Encrypt-then-MAC
• Utils::MACThenDecrypt() in src/Utils.cpp — MAC-then-Decrypt