feat(boards): RAK4631 WisBlock bring-up + build-system cleanup

RAK4631 board:
- SX126X_POWER_EN on P1.05 driven HIGH at init (radio is power-gated;
  without this the chip has no power and SPI hangs)
- HFXO + LFXO external crystals in embassy_nrf::Config (USB CDC-ACM
  needs +/- 500 ppm which the internal RC oscillator can't provide)
- SoftwareVbusDetect(true, true) so USB enumerates without needing a
  CLOCK_POWER interrupt handler
- Green LED on P1.03 via SimpleLed (RAK19007 Base LED1, active HIGH)
- driver/mod.rs: open simple_led feature gate for rak_wisblock_4631
- Spim::new pin-order comment on SPI setup (arg order is sck/miso/mosi,
  not sck/mosi/miso — easy to get wrong)

debug-checkpoint instrumentation (feature-gated, zero cost in release):
- radio.rs: debug_blink::set(N) at each TX-phase boundary, filling in
  the long-aspirational blink-map doc
- debug_blink.rs: checkpoint 19 between prepare_for_cad and cad(), so
  future bring-ups can distinguish modem-setup hang from DIO1-wait hang

justfile + mise.toml:
- set shell := ["mise", "exec", "--", "sh", "-c"] so recipes
  always resolve tools through mise, not whatever happens to be on PATH
- replace per-board := vars + long if/elif _info chain with a single
  case statement — one place per board, two lists (names + metadata)
- new flash-dfu recipe using adafruit-nrfutil via uvx, with VID:PID
  (239a:0029) port autodetect for the Adafruit nRF52 bootloader
- mise.toml: rust pins now carry ARM targets + clippy, so 'mise install'
  is sufficient bootstrapping (no extra rustup target add steps)

Verified TX on real hardware (RAK19007 Base + RAK4631 Core + RAK1921
OLED, US915 band): ADVERT round-trip with an external receiver.

src/display.rs

@@ -37,8 +37,8 @@ use embassy_time::Timer;
 use hsmc::statechart;
 
 use crate::board::{self, Board, DisplayDriver, DisplayParts, LedDriver, LoRaBoard, RgbLed};
-use crate::driver::DisplayBrightness;
 use crate::channel::{DisplayCommand, DisplayCommandChannel, RadioEvent, RadioEventChannel};
+use crate::driver::DisplayBrightness;
 use crate::protocol::LoRaConfig;
 
 use render::{BoardInfo, RSSI_HISTORY_LEN};