refactor: board-owned display init, zero cfg in application code

- Each board now exports DisplayDriver type and create_display() async fn
- ESP32-S3 boards share SSD1306 create_display in board/esp32s3.rs
- RAK WisBlock has its own SSD1306 create_display (different I2C type)
- Wio Tracker has SH1106 create_display (different display IC)
- Removed all cfg_if from display.rs — calls board::create_display()
- Removed display init retry logic (single attempt, return None on failure)
- ZERO board-specific #[cfg(feature)] outside board/, host/mod.rs, and hal/

src/board/esp32s3.rs

@@ -47,6 +47,34 @@ pub struct DisplayParts {
     pub mac: [u8; 6],
 }
 
+// ── Display driver ──────────────────────────────────────────────────
+
+pub type DisplayDriver = ssd1306::Ssd1306Async<
+    ssd1306::prelude::I2CInterface<DisplayI2c>,
+    ssd1306::size::DisplaySize128x64,
+    ssd1306::mode::BufferedGraphicsModeAsync<ssd1306::size::DisplaySize128x64>,
+>;
+
+/// Construct and initialize an SSD1306 display from raw I2C.
+pub async fn create_display(i2c: DisplayI2c) -> Option<DisplayDriver> {
+    use ssd1306::mode::DisplayConfigAsync;
+    use ssd1306::prelude::{Brightness, DisplayRotation};
+    use ssd1306::size::DisplaySize128x64;
+    use ssd1306::{I2CDisplayInterface, Ssd1306Async};
+
+    let interface = I2CDisplayInterface::new(i2c);
+    let mut display = Ssd1306Async::new(interface, DisplaySize128x64, DisplayRotation::Rotate0)
+        .into_buffered_graphics_mode();
+
+    embassy_time::Timer::after_millis(100).await;
+    if display.init().await.is_err() {
+        defmt::error!("SSD1306 display init failed");
+        return None;
+    }
+    let _ = display.set_brightness(Brightness::BRIGHTEST).await;
+    Some(display)
+}
+
 // ── Shared peripheral init helpers ──────────────────────────────────
 
 /// Construct SX1262 radio from an initialized SPI bus.