fix: resolve display stuck after disconnect and radio task deadlock

- Set disconnected flag on DisplayCommand::Reset to block stale radio
  status updates from re-rendering dashboard over splash screen
- Send StopRx to radio when USB DTR drops so radio stops generating
  packets after host disconnects
- Use try_send for unsolicited responses (RxPacket, error recovery,
  StopRx Ok) to prevent radio task deadlock on full response channel
- Fall back to LED-only event loop when display init fails instead of
  returning early and orphaning the LED

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

CHANGELOG.md

@@ -0,0 +1,85 @@
+# Changelog
+
+All notable changes to this project will be documented in this file.
+
+The format is based on [Keep a Changelog](https://keepachangelog.com/),
+and this project adheres to [Semantic Versioning](https://semver.org/).
+
+## [0.2.1] - 2026-04-07
+
+### Fixed
+
+- Display stuck on status screen after USB disconnect (stale radio status
+  updates re-rendered dashboard over splash because `disconnected` flag was
+  not set in the `Reset` handler)
+- Radio left running after host disconnect, now sends `StopRx` when DTR drops
+- System deadlock when host app closes serial port while radio is receiving
+  (unsolicited responses in radio task now use `try_send` to avoid blocking
+  on a full response channel)
+- LED orphaned if OLED display initialization fails (display task now falls
+  back to a LED-only event loop instead of returning early)
+
+## [0.2.0] - 2026-04-07
+
+### Added
+
+- Wio Tracker L1 board support (nRF52840 + SX1262, SH1106 OLED)
+- LED blink on packet activity: brief flash on RX and TX when display is on
+  - RX brightness scales with SNR (stronger signal = brighter)
+  - Works on all boards with a user LED (Heltec V3/V4, Wio Tracker)
+- Native USB CDC-ACM support for Heltec V3 (requires hardware mod: solder R29/R3)
+- `heltec_v3_uart` feature for stock (unmodified) V3 boards via CP2102 bridge
+- `RgbLed` trait and `SimpleLed` driver for GPIO-based LEDs
+- `LoRaBoard` trait with full associated types (`RadioParts`, `CommParts`,
+  `DisplayParts`, `DisplayDriver`, `LedDriver`) and `BoardParts<R, C, D, L>` struct
+
+### Changed
+
+- Major firmware architecture reorganization:
+  - `hal/` module for MCU-specific primitives (ESP32-S3, nRF52840)
+  - `driver/` module for hardware peripheral drivers (SH1106, SimpleLed)
+  - `host/` module for unified USB/UART communication with internal cfg dispatch
+  - `board/` contains only board definitions — no MCU helpers or drivers mixed in
+  - Board files are declarative wiring diagrams calling hal primitives
+- `run()` function has zero board-specific conditional compilation
+- Display init moved to board layer (`create_display()`) — display task has no cfg
+- Flattened `radio/` and `display/` directories (no single-file directories)
+- `build.rs` auto-discovers boards by content (implements `LoRaBoard`) and
+  helper modules by `use super::` imports — no exclusion lists
+- `check` and `clippy` commands now use `--release` profile
+- Deduplicated USB/UART protocol framing (shared `CobsDecoder` + `route_command`)
+- Removed `ErrorCode::CrcError` (SX1262 silently drops bad-CRC packets)
+
+### Fixed
+
+- Display stuck on splash screen for UART boards (disconnected flag started true)
+
+## [0.1.0] - 2026-03-15
+
+### Added
+
+- Transparent LoRa radio over USB CDC-ACM (VID `1209`, PID `5741`)
+- COBS-framed fixed-size LE binary protocol (9 commands, 7 responses)
+- Radio configuration: frequency, bandwidth, spreading factor, coding rate, TX power
+- Continuous RX mode with RSSI/SNR per packet
+- Single-shot TX with optional per-packet config override
+- SSD1306 OLED display support with status dashboard
+  - Radio state, frequency, modulation parameters
+  - Packet counters (RX/TX)
+  - RSSI sparkline (1-minute history, TX shown as dotted bars)
+  - Combined splash/waiting screen on disconnect
+- Auto-detect USB host connect/disconnect via DTR
+- Config validation against per-board hardware limits
+- `TX_POWER_MAX` sentinel (`-128`): auto-use the board's maximum TX power
+- Board support: Heltec V3, Heltec V4, RAK WisBlock 4631
+- Python host library (`clients/python/`) with `pip install` and `donglora-mux` CLI
+- USB multiplexer for sharing one dongle with multiple applications
+- Two-way LoRa bridge over TCP (`examples/lora_bridge.py`)
+
+### Technical
+
+- Embassy async runtime (no threads, CPU sleeps when idle)
+- Zero-config: boots and waits for host commands
+- Protocol-agnostic: firmware has no opinion about what you transmit
+- Tasks never panic: all errors reported to host or logged
+- Board abstraction: one `.rs` file + one Cargo feature per board

Cargo.lock

@@ -372,7 +372,7 @@ dependencies = [
 
 [[package]]
 name = "donglora"
-version = "0.2.0"
+version = "0.2.1"
 dependencies = [
  "cfg-if",
  "cortex-m",

Cargo.toml

@@ -3,7 +3,7 @@ members = ["."]
 
 [package]
 name = "donglora"
-version = "0.2.0"
+version = "0.2.1"
 edition = "2021"
 build = "build.rs"
 authors = ["Stephen Waits <steve@waits.net>"]

src/display.rs

@@ -131,8 +131,15 @@ pub async fn display_task(
     };
 
     let Some(mut display) = crate::board::create_display(parts.i2c).await else {
-        defmt::error!("display init failed, giving up");
-        return;
+        defmt::error!("display init failed, running LED-only loop");
+        loop {
+            match display_commands.receive().await {
+                DisplayCommand::Reset | DisplayCommand::Off => {
+                    led.set_rgb(0, 0, 0).await;
+                }
+                DisplayCommand::On => {}
+            }
+        }
     };
 
     let mut state = DisplayState::new();
@@ -207,6 +214,7 @@ pub async fn display_task(
                 }
                 DisplayCommand::Reset => {
                     state = DisplayState::new();
+                    state.disconnected = true;
                     render::splash(&mut display, &board_info);
                     let _ = display.flush().await;
                     led.set_rgb(0, 0, 0).await;

src/host/usb.rs

@@ -8,6 +8,7 @@ use embassy_usb::Builder;
 use static_cell::StaticCell;
 
 use crate::channel::{CommandChannel, DisplayCommand, DisplayCommandChannel, ResponseChannel};
+use crate::protocol::Command;
 use super::framing::{self, CobsDecoder, MAX_FRAME};
 
 const MAX_PACKET: usize = 64;
@@ -126,8 +127,11 @@ async fn protocol_loop<'d, D: embassy_usb_driver::Driver<'d>>(
         }
 
         let connected = receiver.dtr();
-        if was_connected && !connected && has_display {
-            display_commands.send(DisplayCommand::Reset).await;
+        if was_connected && !connected {
+            let _ = commands.try_send(Command::StopRx);
+            if has_display {
+                display_commands.send(DisplayCommand::Reset).await;
+            }
         }
         if !was_connected && connected && has_display {
             display_commands.send(DisplayCommand::On).await;

src/radio.rs

@@ -113,19 +113,22 @@ pub async fn radio_task(
                         // copy_len <= MAX_PAYLOAD == Vec capacity, so this cannot fail.
                         let _ = payload.extend_from_slice(&rx_buf[..copy_len]);
 
-                        responses
-                            .send(Response::RxPacket {
+                        if responses
+                            .try_send(Response::RxPacket {
                                 rssi: pkt_status.rssi,
                                 snr: pkt_status.snr,
                                 payload,
                             })
-                            .await;
+                            .is_err()
+                        {
+                            warn!("RX packet dropped: response channel full");
+                        }
 
                         if let Err(e) = start_rx(&mut lora, &cfg).await {
                             warn!("restart RX failed: {}", e);
                             state.state = RadioState::Idle;
                             status.sender().send(state.clone());
-                            responses.send(Response::Error(ErrorCode::RadioBusy)).await;
+                            let _ = responses.try_send(Response::Error(ErrorCode::RadioBusy));
                         }
                     }
                     Err(e) => {
@@ -133,7 +136,7 @@ pub async fn radio_task(
                         if start_rx(&mut lora, &cfg).await.is_err() {
                             state.state = RadioState::Idle;
                             status.sender().send(state.clone());
-                            responses.send(Response::Error(ErrorCode::RadioBusy)).await;
+                            let _ = responses.try_send(Response::Error(ErrorCode::RadioBusy));
                         }
                     }
                 },
@@ -210,7 +213,9 @@ async fn handle_cmd(
             let _ = lora.enter_standby().await;
             state.state = RadioState::Idle;
             status.sender().send(state.clone());
-            responses.send(Response::Ok).await;
+            // try_send: StopRx may be sent internally on USB disconnect
+            // when the host isn't draining responses.
+            let _ = responses.try_send(Response::Ok);
         }
         Command::DisplayOn | Command::DisplayOff | Command::GetMac => {}
         Command::Transmit { config, payload } => {