swaits
7fca5fcb50
ESP32-S3 + SX1262 + SH1106 OLED + AXP2101 PMIC, native USB-C. The AXP2101 PMIC gates power to the LoRa chip and the OLED. Without its init sequence (ALDO3 = 3.3 V for LoRa, ALDO1 = 3.3 V for OLED) the SX1262 never responds on SPI and radio init fails. Pin map verified against MeshCore's variants/lilygo_tbeam_supreme_SX1262. PMIC lives on a dedicated I²C1 bus (SDA=42, SCL=41) separate from the SH1106 on I²C0 (SDA=17, SCL=18); I²C1 is used blocking for a one-shot init and then dropped. TCXO at 1.6 V via DIO3. New src/driver/axp.rs holds the AXP2101 init sequence — kept minimal (only the LoRa + OLED rails), since DongLoRa is a LoRa-over-USB bridge and every other rail (GPS, BME280, IMU, SD, batt ADC) is out of scope.