swaits
f54579bfde
Config response (GetConfig) now returns decoded RadioConfig fields instead of raw hex. New all_commands.py exercises all 8 protocol commands in sequence — Ping, SetConfig, GetConfig, StartRx, StopRx, Transmit, DisplayOff, DisplayOn.
106 lines
3.3 KiB
Markdown
106 lines
3.3 KiB
Markdown
# DongLoRa
|
|
|
|
Transparent LoRa radio over USB. Plug in a supported board, talk LoRa
|
|
from your host. The firmware is a dumb pipe — it exposes clean LoRa
|
|
parameters (frequency, bandwidth, spreading factor, coding rate, TX power)
|
|
and gets out of the way. No mesh logic, no protocol opinions, no config files.
|
|
|
|
## Quick Start
|
|
|
|
1. Get a [supported board](#supported-boards)
|
|
2. Install toolchain (see [Building](#building))
|
|
3. Build and flash: `just flash heltec_v4`
|
|
4. Run an example: `uv run examples/simple_rx.py`
|
|
5. See packets
|
|
|
|
## Supported Boards
|
|
|
|
| Board | MCU | Radio | Display |
|
|
|-------|-----|-------|---------|
|
|
| Heltec V3 | ESP32-S3 | SX1262 | SSD1306 OLED |
|
|
| Heltec V4 | ESP32-S3 | SX1262 | SSD1315 OLED |
|
|
| RAK WisBlock 4631 | nRF52840 | SX1262 | SSD1306 OLED (optional) |
|
|
|
|
## Protocol
|
|
|
|
DongLoRa speaks a binary protocol over USB CDC-ACM: COBS-framed,
|
|
fixed-size little-endian messages. 8 commands, 6 response types —
|
|
everything you need to configure the radio, transmit, and receive.
|
|
|
|
See **[docs/PROTOCOL.md](docs/PROTOCOL.md)** for the complete wire format
|
|
specification with worked examples.
|
|
|
|
## Examples
|
|
|
|
All examples use [uv](https://docs.astral.sh/uv/) for dependency management:
|
|
|
|
| Script | Description |
|
|
|--------|-------------|
|
|
| [`all_commands.py`](examples/all_commands.py) | Exercise all 8 commands (Ping, SetConfig, GetConfig, StartRx, StopRx, Transmit, DisplayOn/Off) |
|
|
| [`simple_rx.py`](examples/simple_rx.py) | Configure radio, receive and print packets |
|
|
| [`simple_tx.py`](examples/simple_tx.py) | Transmit a single packet |
|
|
| [`ping_pong.py`](examples/ping_pong.py) | Two-dongle demo (`--role tx` / `--role rx`) |
|
|
| [`meshcore/`](examples/meshcore/) | Full MeshCore packet decoder (advanced example) |
|
|
|
|
## Building
|
|
|
|
Requires [just](https://github.com/casey/just) and Rust.
|
|
|
|
```sh
|
|
just build-all # build firmware for all boards (skips unavailable toolchains)
|
|
just build heltec_v4 # build a specific board
|
|
just check-all # compile-check only (no firmware output)
|
|
just flash heltec_v4 # build + flash
|
|
just clippy heltec_v4 # lint
|
|
```
|
|
|
|
### Xtensa boards (Heltec V3/V4)
|
|
|
|
Requires the [ESP toolchain](https://github.com/esp-rs/espup):
|
|
|
|
```sh
|
|
cargo install espup
|
|
espup install --toolchain-version 1.82.0.3
|
|
```
|
|
|
|
### ARM boards (RAK 4631)
|
|
|
|
Stock Rust stable. Targets are installed automatically.
|
|
|
|
<details>
|
|
<summary><strong>Board Roadmap</strong></summary>
|
|
|
|
### Next Up
|
|
|
|
| Board | MCU | Radio |
|
|
|-------|-----|-------|
|
|
| Heltec V2 | ESP32 | SX1276 |
|
|
| Heltec Wireless Tracker | ESP32-S3 | SX1262 |
|
|
| Heltec Vision Master E213/E290 | ESP32-S3 | SX1262 |
|
|
| LilyGo T-Beam (SX1262) | ESP32 | SX1262 |
|
|
| LilyGo T-Beam Supreme | ESP32-S3 | SX1262 |
|
|
| LilyGo T-Echo | nRF52840 | SX1262 |
|
|
| LilyGo T3 S3 | ESP32-S3 | SX1262 |
|
|
| Seeed Studio Xiao nRF52 WIO | nRF52840 | SX1262 |
|
|
|
|
### Future
|
|
|
|
| Board | MCU | Radio |
|
|
|-------|-----|-------|
|
|
| Elecrow ThinkNode M1-M6 | various | various |
|
|
| Heltec Wireless Paper / MeshPocket / T114 | various | SX1262 |
|
|
| LilyGo T-Deck / T-Echo Lite / LoRa32 | various | various |
|
|
| RAK WisBlock 3112 / WisMesh variants | various | SX1262 |
|
|
| RPI Pico 2040 + WaveShare SX1262 | RP2040 | SX1262 |
|
|
| Seeed Studio SenseCAP / Xiao variants | various | SX1262 |
|
|
|
|
</details>
|
|
|
|
## Contributing
|
|
|
|
See [CONTRIBUTING.md](CONTRIBUTING.md).
|
|
|
|
## License
|
|
|
|
[MIT](LICENSE) — Stephen Waits
|