swaitsandClaude Opus 4.6
3102fc747a
Implement full SSD1306 OLED display support: - Splash screen on boot (1.5s) with project name, version, board - Dashboard showing radio state, config, counters, RSSI/SNR - RSSI history sparkline (64-sample ring buffer, 2px-wide bars) - DisplayOn/DisplayOff host commands routed via dedicated channel - Pure render functions against generic DrawTarget (no hardware coupling) - Display on/off control bypasses radio task entirely Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
16 lines
859 B
Markdown
16 lines
859 B
Markdown
# Embassy USB driver for the Synopsys USB OTG core
|
|
|
|
This crate implements [`embassy-usb-driver`](https://crates.io/crates/embassy-usb-driver) for Synopsys USB OTG devices.
|
|
|
|
It contains the "core" of the driver that is common across all chips using
|
|
the Synopsys OTG IP, but it doesn't contain chip-specific initialization such
|
|
as clock setup and GPIO muxing. You most likely don't want to use this crate
|
|
directly, but use it through a HAL that does the initialization for you.
|
|
|
|
List of HALs integrating this driver:
|
|
|
|
- [`embassy-stm32`](https://crates.io/crates/embassy-stm32), for STMicroelectronics STM32 chips.
|
|
- [`esp-hal`](https://crates.io/crates/esp-hal), for Espressif ESP32 chips.
|
|
|
|
If you wish to integrate this crate into your device's HAL, you will need to add the
|
|
device-specific initialization. See the above crates for examples on how to do it. |