swaits
1fbbf110bc
New protocol command (tag 8): GetMac returns the board's 6-byte hardware address. Useful when multiple dongles are connected to one host. Response (tag 6): MacAddress containing 6 raw bytes. Updated: PROTOCOL.md, CHANGELOG, donglora.py decoder, all_commands.py.
1.4 KiB
1.4 KiB
Changelog
All notable changes to this project will be documented in this file.
The format is based on Keep a Changelog, and this project adheres to Semantic Versioning.
[0.1.0] - Unreleased
Added
- Transparent LoRa radio over USB CDC-ACM (VID
1209, PID5741) - COBS-framed fixed-size LE binary protocol (9 commands, 7 responses)
- Radio configuration: frequency, bandwidth, spreading factor, coding rate, TX power
- Continuous RX mode with RSSI/SNR per packet
- Single-shot TX with optional per-packet config override
- SSD1306 OLED display support with status dashboard
- Radio state, frequency, modulation parameters
- Packet counters (RX/TX)
- RSSI sparkline (1-minute history, TX shown as dotted bars)
- Combined splash/waiting screen on disconnect
- Auto-detect USB host connect/disconnect via DTR
- Config validation against per-board hardware limits
TX_POWER_MAXsentinel (-128): auto-use the board's maximum TX power- Board support: Heltec V3, Heltec V4, RAK WisBlock 4631
- Example: MeshCore packet decoder with group channel decryption
Technical
- Embassy async runtime (no threads, CPU sleeps when idle)
- Zero-config: boots and waits for host commands
- Protocol-agnostic: firmware has no opinion about what you transmit
- Tasks never panic: all errors reported to host or logged
- Board abstraction: one
.rsfile + one Cargo feature per board