client-rs/CHANGELOG.md

Changelog

1.0.2 — 2026-04-23

Changed

• donglora-protocol dependency spec loosened from "1.0.0" to "1". The resolver already accepted any 1.x.y (both specs mean ^1.0.0), but the "1" form signals intent: any 1.x release of the protocol crate is accepted without requiring a fresh donglora-client publication. Behavior unchanged.

1.0.1 — 2026-04-22

Fixed

• discovery::find_port / wait_for_device now match the WCH CH340K USB-UART bridge (1a86:7522) and standard CH340 (1a86:7523) in the BRIDGE_VID_PIDS list. The Elecrow ThinkNode-M2 board ships with a CH340K bridge; previously only CP2102, CH9102, and FTDI bridges were recognized, so donglora-mux and any other donglora-client consumer reported "no device" on that board even when the serial port was clearly present.

1.0.0 — 2026-04-22

Breaking

• Migrated to the DongLoRa Protocol v2 wire format. All message types, tag correlation, and framing now follow PROTOCOL.md v1.0. This is a wire-incompatible break with 0.x clients and firmware. donglora-client now depends on donglora-protocol for the normative type definitions.
• Full tokio-async rewrite. Public API is async; the blocking Client<T: Transport> is gone. Replace with Dongle from donglora_client::connect() (or the new ConnectOptions builder + connect_with). Serial I/O is now tokio-serial; mux connections are tokio::net::UnixStream / tokio::net::TcpStream.
• thiserror-based error taxonomy. anyhow::Result on public APIs is replaced by donglora_client::ClientResult<T> = Result<T, ClientError>. Variants mirror the Python client's DongloraError hierarchy plus transport-level conditions (Timeout, TransportClosed, ReaderExited, BadFrame).

Added

• Dongle::tx_with_retry(data, &RetryPolicy) — randomized backoff + exponential retry for TX_DONE(CHANNEL_BUSY) and ERR(EBUSY), per spec §6.10. Returns a [TxOutcome] capturing every per-attempt result so callers (the bridge TUI especially) can display retry state.
• Auto-recovery from ERR(ENOTCONFIGURED). Dongle caches the applied config from the most recent SET_CONFIG and silently re-applies it + retries once when the firmware's inactivity timer expires mid-session.
• Background keepalive task. Spawned at connect time, pings the device every 500 ms when the host has been idle, tracking the 1 s inactivity window from spec §3.4 with 2× safety margin. Disable via ConnectOptions::keepalive(false).
• Rich RxPayload metadata. Bridge-relevant fields (rssi_tenths_dbm, snr_tenths_db, freq_err_hz, timestamp_us, crc_valid, packets_dropped, origin) are surfaced directly from the wire.
• New examples: cargo run --example tx / --example rx alongside the existing ping, all using the MeshCore US preset (910.525 MHz / BW 62.5 / SF 7 / CR 4/5 / sync 0x1424 / 20 dBm).

Removed

• The Client<T>, Response, RadioConfig, Bandwidth, and TX_POWER_MAX types. Modulation / LoRaConfig / LoRaBandwidth (re-exported from donglora-protocol) replace them.

0.2.1 — 2026-04-07

Fixed

• connect() no longer falls through from mux to USB serial. If a mux socket file exists, connect(None, timeout) and try_connect(timeout) now commit to the mux and return an error if the mux is unreachable — instead of silently bypassing it and grabbing the USB port directly. This prevents a race condition where a client could steal the serial port from the mux during reconnect. Callers with explicit port = Some(...) are unaffected.

0.2.0 — 2026-04-07

Features

• Ping-on-connect validation — all connect functions automatically ping the device after connecting and reject non-DongLoRa devices within 200ms. No more accidentally talking LoRa protocol to an Arduino.
• try_connect(timeout) — non-blocking alternative to connect(). Returns an error immediately if no DongLoRa device is found instead of blocking indefinitely.
• USB-UART bridge chip fallback — find_port() now detects boards using CP2102, CH9102, CH340, or FT232R bridge chips (validated via ping).
• Payload size validation — transmit() rejects payloads exceeding 256 bytes with a clear error before hitting the wire.
• ErrorCode implements std::error::Error — usable in error chains.

Breaking changes

• Wire-level tag constants (CMD_TAG_*, RESP_TAG_*, ERROR_INVALID_CONFIG) removed from the top-level re-exports. Access them via donglora_client::protocol::* if needed.
• connect() and friends now validate the device on connect. Code that previously connected to non-DongLoRa serial devices will now get an error.

Fixes

• Fixed repository URL in crate metadata.
• drain_rx no longer swallows the original error if timeout restore also fails.
• Removed dead firmware/PROTOCOL.md reference from docs.

0.1.0 — 2026-04-06

Initial release.

Features

• High-level Client<T> with send/recv and command helpers (ping, set_config, start_rx, stop_rx, transmit, get_config, get_mac, display_on, display_off)
• COBS wire framing via ucobs (matches firmware implementation)
• Auto-detection connection: TCP mux, Unix socket mux, direct USB serial
• Bounded RX packet buffering (256 packets, FIFO eviction)
• FrameReader accumulator for streaming byte sources
• USB device discovery by VID:PID with blocking wait

Resilience

• Cross-platform timeout handling: TimedOut (Windows) and WouldBlock (Linux/macOS) both treated as clean timeouts in read_frame
• EINTR/Interrupted signals retried automatically in read_frame
• drain_rx always restores the original timeout, even on I/O errors
• TCP mux connections use connect_timeout (bounded by caller's timeout)
• Mux sockets set both read and write timeouts
• SerialTransport tracks timeout accurately for save/restore
• Unexpected unsolicited frames logged via tracing::warn instead of silently discarded