136 lines
6.0 KiB
Markdown
136 lines
6.0 KiB
Markdown
# Changelog
|
||
|
||
## 1.0.2 — 2026-04-23
|
||
|
||
### Changed
|
||
|
||
- `donglora-protocol` dependency spec loosened from `"1.0.0"` to `"1"`.
|
||
The resolver already accepted any `1.x.y` (both specs mean `^1.0.0`),
|
||
but the `"1"` form signals intent: any 1.x release of the protocol
|
||
crate is accepted without requiring a fresh `donglora-client`
|
||
publication. Behavior unchanged.
|
||
|
||
## 1.0.1 — 2026-04-22
|
||
|
||
### Fixed
|
||
|
||
- `discovery::find_port` / `wait_for_device` now match the WCH CH340K
|
||
USB-UART bridge (`1a86:7522`) and standard CH340 (`1a86:7523`) in
|
||
the `BRIDGE_VID_PIDS` list. The Elecrow ThinkNode-M2 board ships
|
||
with a CH340K bridge; previously only CP2102, CH9102, and FTDI
|
||
bridges were recognized, so `donglora-mux` and any other
|
||
`donglora-client` consumer reported "no device" on that board
|
||
even when the serial port was clearly present.
|
||
|
||
## 1.0.0 — 2026-04-22
|
||
|
||
### Breaking
|
||
|
||
- **Migrated to the DongLoRa Protocol v2 wire format.** All message
|
||
types, tag correlation, and framing now follow `PROTOCOL.md` v1.0. This is a
|
||
wire-incompatible break with 0.x clients and firmware. `donglora-client` now
|
||
depends on `donglora-protocol` for the normative type definitions.
|
||
- **Full tokio-async rewrite.** Public API is `async`; the blocking
|
||
`Client<T: Transport>` is gone. Replace with `Dongle` from
|
||
`donglora_client::connect()` (or the new `ConnectOptions` builder +
|
||
`connect_with`). Serial I/O is now `tokio-serial`; mux connections are
|
||
`tokio::net::UnixStream` / `tokio::net::TcpStream`.
|
||
- **`thiserror`-based error taxonomy.** `anyhow::Result` on public APIs
|
||
is replaced by `donglora_client::ClientResult<T> = Result<T, ClientError>`.
|
||
Variants mirror the Python client's `DongloraError` hierarchy plus
|
||
transport-level conditions (`Timeout`, `TransportClosed`, `ReaderExited`,
|
||
`BadFrame`).
|
||
|
||
### Added
|
||
|
||
- **`Dongle::tx_with_retry(data, &RetryPolicy)`** — randomized backoff +
|
||
exponential retry for `TX_DONE(CHANNEL_BUSY)` and `ERR(EBUSY)`, per spec
|
||
§6.10. Returns a [`TxOutcome`] capturing every per-attempt result so callers
|
||
(the bridge TUI especially) can display retry state.
|
||
- **Auto-recovery from `ERR(ENOTCONFIGURED)`.** `Dongle` caches the applied
|
||
config from the most recent `SET_CONFIG` and silently re-applies it + retries
|
||
once when the firmware's inactivity timer expires mid-session.
|
||
- **Background keepalive task.** Spawned at connect time, pings the device
|
||
every 500 ms when the host has been idle, tracking the 1 s inactivity window
|
||
from spec §3.4 with 2× safety margin. Disable via
|
||
`ConnectOptions::keepalive(false)`.
|
||
- **Rich `RxPayload` metadata.** Bridge-relevant fields (`rssi_tenths_dbm`,
|
||
`snr_tenths_db`, `freq_err_hz`, `timestamp_us`, `crc_valid`,
|
||
`packets_dropped`, `origin`) are surfaced directly from the wire.
|
||
- **New examples:** `cargo run --example tx` / `--example rx` alongside the
|
||
existing `ping`, all using the MeshCore US preset
|
||
(910.525 MHz / BW 62.5 / SF 7 / CR 4/5 / sync 0x1424 / 20 dBm).
|
||
|
||
### Removed
|
||
|
||
- The `Client<T>`, `Response`, `RadioConfig`, `Bandwidth`, and `TX_POWER_MAX`
|
||
types. `Modulation` / `LoRaConfig` / `LoRaBandwidth` (re-exported from
|
||
`donglora-protocol`) replace them.
|
||
|
||
## 0.2.1 — 2026-04-07
|
||
|
||
### Fixed
|
||
|
||
- **`connect()` no longer falls through from mux to USB serial.** If a mux
|
||
socket file exists, `connect(None, timeout)` and `try_connect(timeout)` now
|
||
commit to the mux and return an error if the mux is unreachable — instead of
|
||
silently bypassing it and grabbing the USB port directly. This prevents a
|
||
race condition where a client could steal the serial port from the mux during
|
||
reconnect. Callers with explicit `port = Some(...)` are unaffected.
|
||
|
||
## 0.2.0 — 2026-04-07
|
||
|
||
### Features
|
||
|
||
- **Ping-on-connect validation** — all connect functions automatically ping the
|
||
device after connecting and reject non-DongLoRa devices within 200ms. No more
|
||
accidentally talking LoRa protocol to an Arduino.
|
||
- **`try_connect(timeout)`** — non-blocking alternative to `connect()`. Returns
|
||
an error immediately if no DongLoRa device is found instead of blocking
|
||
indefinitely.
|
||
- **USB-UART bridge chip fallback** — `find_port()` now detects boards using
|
||
CP2102, CH9102, CH340, or FT232R bridge chips (validated via ping).
|
||
- **Payload size validation** — `transmit()` rejects payloads exceeding 256
|
||
bytes with a clear error before hitting the wire.
|
||
- **`ErrorCode` implements `std::error::Error`** — usable in error chains.
|
||
|
||
### Breaking changes
|
||
|
||
- Wire-level tag constants (`CMD_TAG_*`, `RESP_TAG_*`, `ERROR_INVALID_CONFIG`)
|
||
removed from the top-level re-exports. Access them via
|
||
`donglora_client::protocol::*` if needed.
|
||
- `connect()` and friends now validate the device on connect. Code that
|
||
previously connected to non-DongLoRa serial devices will now get an error.
|
||
|
||
### Fixes
|
||
|
||
- Fixed repository URL in crate metadata.
|
||
- `drain_rx` no longer swallows the original error if timeout restore also fails.
|
||
- Removed dead `firmware/PROTOCOL.md` reference from docs.
|
||
|
||
## 0.1.0 — 2026-04-06
|
||
|
||
Initial release.
|
||
|
||
### Features
|
||
|
||
- High-level `Client<T>` with send/recv and command helpers (ping, set_config,
|
||
start_rx, stop_rx, transmit, get_config, get_mac, display_on, display_off)
|
||
- COBS wire framing via `ucobs` (matches firmware implementation)
|
||
- Auto-detection connection: TCP mux, Unix socket mux, direct USB serial
|
||
- Bounded RX packet buffering (256 packets, FIFO eviction)
|
||
- `FrameReader` accumulator for streaming byte sources
|
||
- USB device discovery by VID:PID with blocking wait
|
||
|
||
### Resilience
|
||
|
||
- Cross-platform timeout handling: `TimedOut` (Windows) and `WouldBlock`
|
||
(Linux/macOS) both treated as clean timeouts in `read_frame`
|
||
- `EINTR`/`Interrupted` signals retried automatically in `read_frame`
|
||
- `drain_rx` always restores the original timeout, even on I/O errors
|
||
- TCP mux connections use `connect_timeout` (bounded by caller's timeout)
|
||
- Mux sockets set both read and write timeouts
|
||
- `SerialTransport` tracks timeout accurately for save/restore
|
||
- Unexpected unsolicited frames logged via `tracing::warn` instead of silently
|
||
discarded
|