The Rmt struct was being dropped after extracting channel0, which
likely disabled the RMT peripheral. Use ManuallyDrop to keep it alive.
Also log WS2812 transmit errors instead of silently discarding them.
- LED blink is now 50ms (was waiting for 1s timer tick)
- RX blink: green brightness scaled by SNR (-20dB→dim, +15dB→bright)
- TX blink: fixed red brightness
- Blink is self-contained (on→50ms delay→off) instead of timer-based
- V3 white LED: any non-zero = on, so SNR scaling is invisible but
V4 WS2812 will show green intensity varying with signal quality
The Heltec V3 has a plain white LED on GPIO35 (simple GPIO, not
addressable). Only the V4 has a WS2812B RGB LED on GPIO38.
- Created driver/simple_led.rs for single-color GPIO LEDs
- V3/V3-UART boards: SimpleLed on GPIO35 (white blink on RX/TX)
- V4 board: unchanged (WS2812 on GPIO38, green/red colors)
- nRF boards: unchanged (no LED, type LedDriver = ())
- Added RgbLed trait with impl on () for boards without LED
- Added WS2812 driver (driver/ws2812.rs) using ESP32-S3 RMT peripheral
- 80MHz clock, 12.5ns resolution, 24-bit GRB encoding
- Zero extra crate dependencies
- Heltec V3/V3-UART/V4: WS2812B on GPIO38 via RMT channel 0
- RAK WisBlock/Wio Tracker: type LedDriver = (), led = None (no-op)
- Display task: green blink on RX packet, red blink on TX packet
- LED auto-off on timer tick (~1s), off when display is off/reset
- LoRaBoard trait gains type LedDriver: RgbLed associated type
- BoardParts gains led: Option<L> field
- heltec_v3 now uses USB OTG (requires hardware mod: solder R29/R3)
- heltec_v3_uart added as fallback for stock boards
- Removed every #[allow(dead_code)] — fixed root causes instead:
- Comm types (UsbParts/UartParts) moved to individual board files
- USB/UART init removed from hal (boards call esp-hal directly)
- SH1106 driver gated on boards that use it
- UART task sends DisplayCommand::Reset at startup (variant now used)
- ErrorCode::CrcError removed (SX1262 drops bad-CRC silently)
- check/clippy now use --release (no more Xtensa dev-mode warnings)
- Updated README with hardware mod docs and board table
The default heltec_v3 feature now uses native USB OTG (same as V4),
appearing as /dev/ttyACM0 with the DongLoRa VID:PID (1209:5741).
This requires a hardware mod: solder R29/R3 and disconnect the CP2102
from the USB data lines.
Stock (unmodified) V3 boards should use the new heltec_v3_uart feature
which preserves the original UART-over-CP2102 behavior (/dev/ttyUSB0).
- heltec_v3: switched from UART to USB OTG
- heltec_v3_uart: new feature, UART fallback for stock boards
- Removed #[cfg] gates on UsbParts/UartParts (both always defined)
- Updated README with hardware mod instructions and board table
- Updated justfile with heltec_v3_uart board definition
The display task started with disconnected=true, waiting for a
DisplayCommand::On that the USB task sends on DTR connect. The UART
task has no DTR, so the display never left the "disconnected" state
and ignored all radio status updates. Start connected instead — the
USB task will send Reset on actual disconnect.
- LoRaBoard trait now has associated types: RadioParts, CommParts, DisplayParts, DisplayDriver
- into_parts() is on the trait (enforced by compiler, not implicit convention)
- BoardParts<R, C, D> struct replaces tuple return from into_parts()
- mac_address() stays on trait, MAC also in BoardParts for convenience
- Removed mac field from DisplayParts (display task calls Board::mac_address())
- DisplayDriver associated type requires DrawTarget<Color = BinaryColor>
- Each board now exports DisplayDriver type and create_display() async fn
- ESP32-S3 boards share SSD1306 create_display in board/esp32s3.rs
- RAK WisBlock has its own SSD1306 create_display (different I2C type)
- Wio Tracker has SH1106 create_display (different display IC)
- Removed all cfg_if from display.rs — calls board::create_display()
- Removed display init retry logic (single attempt, return None on failure)
- ZERO board-specific #[cfg(feature)] outside board/, host/mod.rs, and hal/
- Flattened radio/ directory to radio.rs (was just one file)
- Flattened display/ to display.rs (combined task + rendering as inline module)
- Moved SH1106 display driver reference from display/ to driver/ (done in Phase 2)
- Suppressed dead_code warnings for conditional USB/UART types in hal
- All boards: zero warnings, zero cfg in application code
- Created host/ module with internal cfg dispatch (USB vs UART)
- Moved usb/task.rs → host/usb.rs, uart/task.rs → host/uart.rs
- Moved protocol_io.rs → host/framing.rs
- Renamed usb_task/uart_task to host_task (uniform name)
- Removed all host-comm cfg from main.rs
- The run() function now has ZERO board-specific conditional compilation
- Deleted old usb/, uart/, protocol_io.rs modules
- Created hal/esp32s3.rs with MCU primitives (SPI, I2C, USB, UART, timer, MAC)
- Created hal/nrf52840.rs with shared nRF boilerplate (interrupts, bus wrapping, VBUS, MAC)
- Moved SH1106 OLED driver from display/ to driver/ (clear separation from app code)
- Board esp32s3.rs now delegates MCU init to hal, keeps only peripheral wiring (RadioParts)
- nRF board files use hal for shared StaticCell patterns, mac_address, interrupt bindings
- Board files still own pin assignments and peripheral construction
- Made protocol_io.rs compile for all boards (not just heltec_v3)
- Renamed FrameAccumulator → CobsDecoder, encode_response → cobs_encode_response
- Refactored USB task to use shared CobsDecoder and route_command from protocol_io
- Removed ~80 lines of duplicated COBS framing and command routing from usb/task.rs
- Single canonical MAX_FRAME definition in protocol_io.rs
- Track serial timeout in field instead of returning hardcoded 2s
- Always restore timeout in drain_rx, even on read errors
- Handle EINTR/Interrupted in read_frame (retry instead of error)
- Use connect_timeout for TCP mux (no more 2-min hangs)
- Set write timeout on mux sockets (unix + tcp)
- Log unexpected unsolicited frames in recv via tracing::warn
- Add unix socket timeout test for WouldBlock handling
- Add CHANGELOG.md, remove resolved CLAUDE_TODO.md
Add donglora-client (clients/rust/) and donglora-mux (mux/rust/) as
Rust implementations of the existing Python client library and mux
daemon. Both are standalone Cargo projects with no-panic guarantees
enforced by clippy deny lints.
donglora-client provides protocol types, COBS framing, USB device
discovery, serial/mux transports, and a high-level Client<T> with
send/recv. donglora-mux is a fully async (tokio) multiplexer daemon
with dongle hot-plug reconnect, per-client bounded send queues,
SetConfig locking, and StartRx/StopRx reference counting.
52 unit tests across both crates. Updates README roadmap checkboxes
and CONTRIBUTING docs to reflect the new implementations.
Drop INVALID and UNRELIABLE packets per PROTOCOL.md quality grading
to avoid retransmitting likely-corrupt data. MARGINAL packets are
forwarded with a warning tag. All RX log lines now include SNR.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Add cargo-binutils to mise.toml (needed for `just size`)
- Remove jj from mise.toml (optional, not a build dependency)
- Silence `mise install` output when tools are current (--quiet)
- Add `just outdated` recipe with embassy-executor exclusion
(esp-rtos 0.2 pins embassy-executor ^0.9; 0.10 renamed arch-*
features to platform-*, which crashes cargo-outdated)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Audited against meshcore-spec and fixed all compliance gaps:
- Fix trace hash size encoding: use 1<<(flags&3) not (flags&3)+1
- Reject reserved path hash_size_code 3 per spec Section 3
- Minimum packet size 3 bytes (was 2)
- Add MAX_PACKET_PAYLOAD (184) and min payload (1) validation
- Tighten payload minimums: ANON_REQ≥51, encrypted≥20, group≥19,
multipart≥2
- Add node_type 0 ("none") to NODE_TYPES
- Fix node_type fallback display (was "node=type=14", now "node=0x0e")
Add packet quality warnings for likely-corrupt frames:
- decode_meshcore_packet returns (str, list[str]) with quality warnings
- ADVERT: flag bad node_type, bad UTF-8 in name, future/bad timestamps
- Combine content warnings with low-SNR signal at display layer
- Warnings stack: one flag = maybe, multiple = high confidence corrupt
Update test corpus and generators for tightened validation rules.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
These paths are already in .gitignore but were committed before the
ignore rules existed. Remove them from the index so they stay local.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Add SAFETY comment to nRF52840 FICR unsafe block explaining the
register addresses and why read_volatile is correct.
Replace silent fallback defaults in to_sf()/to_cr() with defmt::warn
so invalid values are logged instead of silently accepted.
Remove unnecessary #[allow(dead_code)] on DisplayCommand enum.
Add clippy::undocumented_unsafe_blocks = "deny" lint to Cargo.toml.
Replace hardcoded USB serial "001" with the board's MAC address so
multiple dongles are uniquely identifiable on one host. Thread MAC
through usb_task as a parameter, removing the Board import.
Add 31 unit tests for protocol serialization: RadioConfig roundtrips,
all Command tags, all Response variants, validation boundaries, and
edge cases. Gate firmware modules with #[cfg(not(test))] and add
DONGLORA_HOST_TEST env var so `just test` runs on the host.
Move common type aliases, peripheral bundles, and init helpers for
ESP32-S3 boards into src/board/esp32s3.rs. Heltec V3 (146->48 lines)
and V4 (155->57 lines) become thin wrappers containing only
board-specific code (Vext GPIO pin, display reset sequence).
Update build.rs to exclude esp32s3.rs from board discovery and
mod.rs.j2 to include the shared module under an ESP feature gate.
Switch ucobs from local path dependency to crates.io v0.2. Add note
documenting that embassy-executor 0.10 and ucobs 0.3 are blocked on
the ESP Xtensa toolchain supporting Rust >= 1.93 stable.
Replace raw dict dumps and debug-style prints with consistent
themed output using >>> / <<< markers and formatted responses.
Quiet TxDone noise, dim status messages, and align all output
with the 2-space indent used by RX packet lines.
New layout:
- Mode box (left): RX/TX indicator with vertical separator
- Title box (right): 'DongLoRa v{ver}' + radio settings (freq/bw/sf/cr)
- Centered info rows: packet counters + RSSI/SNR with labels
- Sparkline bar graph fills remaining height
- Idle state returns to splash screen (active screen only for RX/TX)
- Layout positions derived from display dimensions (h/w agnostic)
- RSSI history buffer doubled to 128 slots (~2 min at 1s/slot)
- Smart compact_count() formatting for large RX/TX counters (k/M)
The rightmost graph bar now renders the current (uncommitted) time
slot, so incoming packets appear on the sparkline instantly instead
of waiting up to 1 second for the slot timer to commit them. When
the slot advances, the live bar shifts left into committed history
and a fresh live slot begins.
build-std=core,alloc was globally enabled in .cargo/config.toml, which
conflicted with cargo-fuzz's own -Zbuild-std, causing duplicate core
errors. Now only passed for Xtensa targets via the Justfile.
swaits
